Ubuntu: различия между версиями

Содержимое удалено Содержимое добавлено
Нет описания правки
Строка 1:
'''Искусственное дыхание''' — комплекс мер, направленных на поддержание оборота воздуха через легкие у человека (или животного), переставшего дышать. Может производиться с помощью аппарата искусственного дыхания, либо человеком (дыхание изо рта в рот). Обычно совмещается с [[искусственный массаж сердца|искусственным массажем сердца]]. Типичные ситуации, в которых требуется искусственное дыхание: несчастные случаи в результате автомобильных аварий, происшествия на воде, поражение электрическим током, утопление. Аппарат искусственного дыхания используется также в хирургических операциях.
[[Категория:Операционные системы]]
= Неофициальное руководство начинающего пользователя Ubuntu 8.10 (Intrepid Ibex) =
 
=== Искусственное дыхание «рот-в-рот» ===
__TOC__
[[Изображение:ArificialBreath.JPG|thumb|260 px|right|Искусственное дыхание «рот-в-рот»]]
Наиболее эффективный способ искусственного дыхания.
# Спасите пострадавшего, уберите от него ток, если он им поражён, вытащите из воды при утоплении, обеспечьте его безопасность.
# Положите пострадавшего на спину. Откройте ему рот, следите, чтобы язык не закрывал гортань.
# Одной рукой удерживайте голову и шею пострадавшего, другой зажмите его нос. Глубоко вдохните и, плотно прижавшись ртом ко рту, сделайте выдох.
# Первые 5—10 выдохов делайте быстро (за 20—30 с), следующие— со скоростью 12—15 выдохов в минуту.
# Следите за движением грудной клетки пострадавшего: если после вашего выдоха в рот его грудная клетка поднялась, значит, дыхательные пути проходимы и искусственное дыхание вы делаете правильно.
# Если нет пульса, параллельно с искусственным дыханием необходимо делать массаж сердца.
 
=== Искусственное дыхание «рот-в-нос» ===
== Общие замечания ==
Проводится, если рот спасаемого повреждён или по каким-либо причинам нельзя использовать метод «рот-в-рот». Не так эффективно, как искусственное дыхание «рот-в-рот», «рот-в-нос» также способно спасти человека.
 
== См. также ==
#Это неофициальное руководство для начинающих пользователей Ubuntu 8.10 (Intrepid Ibex). Оно никоим образом не связано с Ubuntu и Canonical Ltd.
* [[Реанимация]]
#Это руководство может быть обсуждено на официальном [http://www.ubuntuforums.org/forumdisplay.php?f=78 UbuntuGuide.org форуме] на ubuntuforums.org. Присоединяйтесь к обсуждению.
* [[Искусственный массаж сердца]]
#Руководство проверено на полной установке Ubuntu 8.10 x86 Install CD (Intrepid Ibex).
#Текст, написанный в голубой рамке - это команды для исполнения в терминальном режиме (Applications → System Tools → Terminal), а иногда, если указано, для других целей.
#Для уменьшения вероятности опечатки, скопируйте и вставьте команды в Терминал (правой кнопкой мыши → "Скопировать" или "Вставить". Также для копирования можно использовать Ctrl+C/Ctrl+Ins и Ctrl+V/Shift+Ins для вставки).
#"[[:w:sudo|sudo]]" означает исполнение суперпользователем. "sudo" запросит пароль, — введите свой пароль пользователя.
#Если вы захотите узнать больше о команде, просто посмотрите страницу документации командой "man". Например, "man sudo", набранная в командной строке консоли, покажет вам страницу документации по команде "sudo".
#Если вам надоело каждый раз печатать "apt-get", прочитайте [[#How to apt-get the easy way (Synaptic)]].
#Чтобы загрузить файл, нажмите правой кнопкой мышки на ссылке -> выберите "Save Link As..." -> убедитесь в правильности имени и расширения файла.
#Если Вы хотите помочь в переводе Ubuntu на ваш родной язык или еще каким-либо способом, посетите https://launchpad.net/
#Да пребудет с вами вечно дух "человечности к другим"...
 
[[Категория:Дыхание]]
 
[[Категория:Медицина]]
:Если вы используете Kubuntu, вам придётся установить Gedit
[[Категория:Первая помощь]]
 
[[Категория:Искусственное дыхание]]
sudo apt-get install gedit
 
:Или заменить 'gedit' на 'kwrite', например, вместо написания
 
sudo gedit /etc/apt/sources.list
 
:пишите
 
sudo kwrite /etc/apt/sources.list
 
:''Если вы используете 64-битную версию, замените "i386" на "amd64"''
 
== Введение ==
 
==== Что такое Ubuntu? ====
 
*http://www.ubuntu.com/ubuntu
 
==== Где можно посмотреть список программ/библиотек идущих с Ubuntu? ====
 
*Результат dpkg -l: [http://packages.ubuntu.com/intrepid/allpackages.en.txt.gz здесь]
*http://packages.ubuntu.com/intrepid
*http://distrowatch.com/table.php?distribution=ubuntu
 
==== Где можно скачать Ubuntu? ====
 
*http://releases.ubuntu.com/8.10/
 
==== Где можно абсолютно бесплатно заказать диски с Ubuntu? ====
 
*http://shipit.ubuntu.com
 
==== Где искать помощь? ====
 
*''System -> Help -> System Documentation''
 
*На русском языке:
**[http://forum.ubuntu.ru Форум русскоязычного сообщества Ubuntu]
**[http://ubuntu.ru Wiki русскоязычного сообщества Ubuntu]
**[irc://irc.freenode.net/ubuntu-ru Канал IRC]
 
*На английском языке:
**[http://help.ubuntu.com/ Сайт официальной документации]
**[https://wiki.ubuntu.com/UserDocumentation Официальная документация пользователя (wiki)]
**[http://doc.gwos.org/index.php/Main_Page Ubuntu Document Storage Facility]
**[http://www.ubuntulinux.org/community/lists Списки рассылки]
**[http://www.ubuntulinux.org/community/forums Форумы]
**[irc://irc.freenode.net/ubuntu Канал IRC]
 
 
==== Где искать новые программы? ====
 
* http://gnomefiles.org/
* http://www.kde-apps.org/
* [http://freshmeat.net/browse/18/ http://freshmeat.net]
* http://sourceforge.net/
 
==== Где искать элементы оформления рабочего стола? ====
 
* http://gnome-look.org/
* http://www.kde-look.org/
* http://art.gnome.org/
 
== Репозитории ==
 
==== Как подключить дополнительные репозитории? ====
 
*Прочтите [[#Общие замечания]]
*Вы также можете [[#Более простая замена apt-get (Synaptic) | добавить дополнительные репозитории с помощью Synaptic]]. Новые пользователи могут обнаружить более простым добавление новых репозиториев с помощью Synaptic. Если вы пройдете по ссылке выше, вам не надо будет выполнять данный совет.
 
sudo cp /etc/apt/sources.list /etc/apt/sources.list_backup
sudo gedit /etc/apt/sources.list
 
*Замените всё следующими строками
 
## Add comments (##) in front of any line to remove it from being checked.
## Use the following sources.list at your own risk.
deb http://archive.ubuntu.com/ubuntu intrepid main restricted universe multiverse
deb-src http://archive.ubuntu.com/ubuntu intrepid main restricted universe multiverse
## MAJOR BUG FIX UPDATES produced after the final release
deb http://archive.ubuntu.com/ubuntu intrepid-updates main restricted universe multiverse
deb-src http://archive.ubuntu.com/ubuntu intrepid-updates main restricted universe multiverse
## UBUNTU SECURITY UPDATES
deb http://security.ubuntu.com/ubuntu intrepid-security main restricted universe multiverse
deb-src http://security.ubuntu.com/ubuntu intrepid-security main restricted universe multiverse
## BACKPORTS REPOSITORY (Unsupported. May contain illegal packages. Use at own risk.)
deb http://archive.ubuntu.com/ubuntu intrepid-backports main restricted universe multiverse
deb-src http://archive.ubuntu.com/ubuntu intrepid-backports main restricted universe multiverse
## PLF REPOSITORY (Unsupported. May contain illegal packages. Use at own risk.)
deb http://packages.freecontrib.org/ubuntu/plf intrepid free non-free
deb-src http://packages.freecontrib.org/ubuntu/plf intrepid free non-free
 
*Сохраните редактируемый файл
 
sudo apt-get update
 
* Вы также можете сгенерировать свой собственный sources.list и найти другие репозитории на: http://www.ubuntulinux.nl/source-o-matic
* ''Используйте ваш собственный sources.list только если вы понимаете, что вы делаете!''
 
== Обновление Ubuntu ==
 
==== Как вручную обновить Ubuntu? ====
 
*Прочтите [[#Общие сведения]]
*Прочтите [[#Как подключить дополнительные репозитарии?]]
 
sudo apt-get update
sudo apt-get upgrade
'''ИЛИ'''
 
Используйте Update Manager: ''System -> Administration -> Update Manager''
 
==== Как автоматически обновить Ubuntu? ====
 
*Прочтите [[#Как использовать crontab]]
*Прочтите [[#Примеры заданий cron]]
*Создайте ежедневное задание cron для запуска обновлений apt-get
''ВАЖНО:'' В зависимости от того как много пакетов требуют загрузки и обновления, во время первого обновления может наблюдаться значительное снижение скорости.
 
sudo crontab -e
 
*Добавьте следующую строку в файл crontab
''ВАЖНО:'' Второй 0 означает время запуска команды. Его можно заменить на любое удобное для вас значение от 0 до 23
 
0 0 * * * apt-get -y update && apt-get y upgrade && apt-get -y dist-upgrade && apt-get -y clean
 
*Сохраните и закройте файл
*При этом будет создано задание cron запускаемое ежедневно в 24:00, позволяющее apt-get получить новые пакеты из репозиториев, обновить пакеты (включая kernel) и очистить кеш от устаревших пакетов, тем самым сохранив свободное место на жестком диске
 
== Установка приложений ==
 
 
==== Как использовать Easy Ubuntu ====
 
*Прочтите [[#Общие замечания]]
*Easy Ubuntu это небольшая простая утилита, которая позволит новичкам без труда устанавливать великое множество компонентов для Ubuntu, таких как кодеки мультимедиа, шрифты, Macromedia Flash и Sun Java.
 
wget http://easyubuntu.freecontrib.org/files/easyubuntu-3.023.tar.gz
tar -zxf easyubuntu-3.023.tar.gz
cd easyubuntu
sudo python easyubuntu.in
 
*В окне Easy Ubuntu отметьте подходящие строчки для закачки и установки компонентов Ubuntu
*Важно: пользователи предыдущих версий Easy Ubuntu могут иметь некоторые трудности с установкой Flash и Java
[http://www.debianadmin.com/applications-installation-in-one-click-using-easyubuntu.html Учебник с картинками по EasyUbuntu]
 
==== Как установить Automatix2 на Ubuntu, Kubuntu и Xubuntu ====
 
*Прочтите [[#Общие замечания]]
 
 
 
==== Как установить Демон буфера обмена для GNOME? ====
 
*Прочтите [[#Общие замечания]]
 
wget -c http://easylinux.info/uploads/gnome-clipboard-daemon-1.0.bin.tar.bz2
sudo tar jxvf gnome-clipboard-daemon-1.0.bin.tar.bz2 -C /usr/bin/
sudo chown root:root /usr/bin/gnome-clipboard-daemon
sudo chmod 755 /usr/bin/gnome-clipboard-daemon
sudo gnome-clipboard-daemon &
export EDITOR=gedit && crontab -e
 
*Добавьте следующую строку в конец файла
 
@reboot gnome-clipboard-daemon
 
*Сохраните редактируемый файл
 
==== Как установить J2SE Runtime Environment (JRE) и плагин для Mozilla Firefox ====
 
*Прочтите [[#Общие замечания]]
*Прочтите [[#Как подключить дополнительные репозитарии?]]
 
sudo apt-get install sun-java5-jre sun-java5-plugin
echo 3 | sudo update-alternatives --config java
 
*При запросе согласитель с положениями лицензии DLJ
 
==== Как установить Flash Player (Macromedia Flash) Plug-in для Mozilla Firefox? ====
 
*Прочтите [[#Общие замечания]]
*Прочтите [[#Как подключить дополнительные репозитарии?]]
 
sudo apt-get install flashplugin-nonfree
sudo update-flashplugin
 
*Перезапустите Mozilla Firefox
 
==== Как установить PDF Reader (Adobe Reader) и Plug-in для Mozilla Firefox? ====
 
*Прочтите [[#Общие замечания]]
*Прочтите [[#Как подключить дополнительные репозитарии?]]
 
sudo apt-get install acroread
sudo apt-get install mozilla-acroread
sudo apt-get install acroread-plugins
 
*Прочтите [[#Как обновить панель GNOME?]]
*Applications -> Office -> Adobe Reader
*Перезапустите Mozilla Firefox
 
==== Как установить менеджер закачек (Downloader for X)? ====
 
*Прочтите [[#Общие замечания]]
*Прочтите [[#Как подключить дополнительные репозитарии?]]
 
sudo apt-get install d4x
 
*Прочтите [[#Как обновить панель GNOME?]]
*Applications -> Internet -> Downloader for X
 
==== Как установить клиент FTP (gFTP)? ====
 
*Прочтите [[#Общие замечания]]
*Прочтите [[#Как подключить дополнительные репозитарии?]]
 
sudo apt-get install gftp
 
*Read [[# Как обновить панель GNOME?]]
*Applications -> Internet -> gFTP
 
==== Как установить программу предоставления доступа к файлам (DC++)? ====
 
*Прочтите [[#Общие замечания]]
 
wget -c http://easylinux.info/uploads/linuxdcpp.tar.gz
sudo tar zxvf linuxdcpp.tar.gz -C /opt
sudo gedit /usr/share/applications/dcpp.desktop
 
*Добавьте следующие строки в новый файл
 
[Desktop Entry]
Encoding=UTF-8
Name=DC++
Exec=/opt/linuxdcpp/ldcpp
Terminal=false
Type=Application
StartupNotify=true
Icon=/opt/linuxdcpp/pixmaps/linuxdcpp.svg
Categories=Application;Network;
 
*Сохраните редактируемый файл
 
*Applications -> Internet -> DC++
 
==== Как установить P2P-клиент сети BitTorrent (Azureus)? ====
 
*Прочтите [[#Общие замечания]]
*Прочтите [[#Как установить J2SE Runtime Environment (JRE) и плагин для Mozilla Firefox]]
 
wget -c http://kent.dl.sourceforge.net/sourceforge/azureus/Azureus_2.4.0.2_linux.tar.bz2
sudo tar jxvf Azureus_2.4.0.2_linux.tar.bz2 -C /opt
sudo gedit /usr/share/applications/azureus.desktop
 
*Добавьте следующие строки в новый файл
[Desktop Entry]
Name=Azureus
Comment=Клиент сети Bittorrent
Exec=/opt/azureus/azureus
Icon=/opt/azureus/Azureus.png
Terminal=false
Type=Application
Categories=Application;Network;
 
*Сохраните редактируемый файл
*Applications -> Internet -> Azureus
 
==== Как установить P2P-клиент eMule (aMule)? ====
 
*Прочтите [[#Общие замечания]]
*Прочтите [[#Как подключить дополнительные репозитарии?]]
 
sudo apt-get install amule
 
*Read [[#Как обновить панель GNOME?]]
*Applications -> Internet -> aMule
 
==== Как установить P2P-клиент сети Gnutella (FrostWire)? ====
 
*Прочтите [[#Общие замечания]]
*Прочтите [[#Как установить J2SE Runtime Environment (JRE) и плагин для Mozilla Firefox]]
 
wget -c http://www.users.on.net/~stubby/FrostWire-4.10.9-2.i586.deb
sudo dpkg -i FrostWire-4.10.9-2.i586.deb
 
*Applications -> Internet -> FrostWire
 
==== Как установить программу для обмена сообщениями (Skype)? ====
 
*Прочтите [[#Общие замечания]]
 
sudo gedit /etc/apt/sources.list
 
* Добавьте следующие строки в конец файла
 
## Repository for Skype
deb http://download.skype.com/linux/repos/debian/ stable non-free
 
* Сохраните редактируемый файл
 
sudo apt-get update
sudo apt-get install skype
 
*Applications -> Internet -> Skype
 
==== Как установить WinPopup (LinPopUp)? ====
 
*Прочтите [[#Общие замечания]]
*Прочтите [[#Как подключить дополнительные репозитарии?]]
*Read [[#How to install Samba Server for files/folders sharing service]]
 
sudo apt-get install linpopup
sudo gedit /usr/share/applications/linpopup.desktop
 
*Добавьте следующие строки в новый файл
 
[Desktop Entry]
Name=LinPopUp
Comment=LinPopUp
Exec=linpopup
Icon=/usr/share/pixmaps/linpopup.xpm
Terminal=false
Type=Application
Categories=Application;Utility;
 
*Сохраните редактируемый файл
*Прочтите [[#Как обновить панель GNOME?]]
*Applications -> Accessories -> LinPopUp
 
==== Как установить кодеки мультимедиа? ====
 
[[User:Stubby|Stubby]] Все известные кодеки работают кроме wmv
 
*Прочтите [[#Общие замечания]]
*Прочтите [[#Как подключить дополнительные репозитарии?]]
 
sudo apt-get install gstreamer0.10-ffmpeg
sudo apt-get install gstreamer0.10-gl
sudo apt-get install gstreamer0.10-plugins-base
sudo apt-get install gstreamer0.10-plugins-good
sudo apt-get install gstreamer0.10-plugins-bad
sudo apt-get install gstreamer0.10-plugins-bad-multiverse
sudo apt-get install gstreamer0.10-plugins-ugly
sudo apt-get install gstreamer0.10-plugins-ugly-multiverse
 
*Прочтите [[#Как перезапустить GNOME без перезагрузки компьютера]]
 
==== Как установить поддержку воспроизведения DVD? ====
 
[[User:ironss|ironss]]: gstreamer dvd plugin is available as part of plugins-bad (or ugly?) and does not work reliably. However, Totem works with the xine backend to play back DVDs. This will keep you going until gstreamer gets dvd playback. Note that you do not have to install xine-ui or mplayer as suggested in
 
*Прочтите [[#Общие замечания]]
*Прочтите [[#Как подключить дополнительные репозитарии?]]
 
sudo apt-get install libdvdread3
sudo /usr/share/doc/libdvdread3/examples/install-css.sh
sudo apt-get install totem-xine
 
==== Как установить мультимедийный проигрыватель (xine-ui) ====
 
*Прочтите [[#Общие замечания]]
*Прочтите [[#Как подключить дополнительные репозитарии?]]
*Прочтите [[#Как установить мультимедиа кодеки]]
*Прочтите [[#Как установить поддержку воспроизведения DVD]]
 
sudo apt-get install xine-ui
 
*Ассоциировать Xine с мультимедийными файлами
 
gconftool-2 --type string --set /desktop/gnome/volume_manager/autoplay_dvd_command "xine dvd://"
sudo rm -f /usr/share/applnk/Multimedia/xine.desktop
sudo ln -fs /usr/share/xine/desktop/xine.desktop /usr/share/applications/
sudo cp /usr/share/applications/defaults.list /usr/share/applications/defaults.list_backup
sudo sed -e 's/totem.desktop/xine.desktop/g' /usr/share/applications/defaults.list_backup > /tmp/defaults.list
sudo mv /tmp/defaults.list /usr/share/applications/defaults.list
 
*Прочтите [[#How to refresh GNOME panel]]
*Прочтите [[#How to refresh GNOME desktop]]
*Applications -> Sound & Video -> xine
 
==== Как установить VLC Multimedia player ====
*Прочтите [[#Общие замечания]]
*Прочтите [[#Как подключить дополнительные репозитарии?]]
 
sudo apt-get install vlc vlc-plugin-*
 
:Applications -> Sound and Video -> VLC Media Player
 
==== Как установить мультимедиа плеер (Totem) c плагином для Mozilla Firefox ====
 
*Прочтите [[#Общие замечания]]
*Прочтите [[#Как подключить дополнительные репозитарии?]]
*Read [[#Как установить кодеки мультимедиа?]]
*Read [[#Как установить поддержку воспроизведения DVD?]]
 
sudo apt-get install totem-gstreamer-firefox-plugin
 
*Перезапустите Mozilla Firefox
 
==== Как установить мультимедиа плеер (XMMS) ====
 
*Прочтите [[#Общие замечания]]
*Прочтите [[#Как подключить дополнительные репозитарии?]]
*Read [[#How to install Multimedia Codecs]]
 
sudo apt-get install xmms
sudo apt-get install xmms-skins
wget -c http://easylinux.info/uploads/xmms-wma_1.0.4-2_i386.deb
sudo dpkg -i xmms-wma_1.0.4-2_i386.deb
 
*Associate XMMS to play MP3/M3U/WAV files
 
sudo cp /usr/share/applications/defaults.list /usr/share/applications/defaults.list_backup
sudo cp /usr/share/applications/defaults.list /tmp/defaults.list_tmp
sudo sed -e 's/audio\/mpeg=.*/audio\/mpeg=XMMS.desktop/g' /tmp/defaults.list_tmp > /tmp/defaults.mp3
sudo sed -e 's/audio\/x-mpegurl=.*/audio\/x-mpegurl=XMMS.desktop/g' /tmp/defaults.mp3 > /tmp/defaults.m3u
sudo sed -e 's/audio\/x-wav=.*/audio\/x-wav=XMMS.desktop/g' /tmp/defaults.m3u > /tmp/defaults.list
sudo mv /tmp/defaults.list /usr/share/applications/defaults.list
sudo rm -f /tmp/defaults.*
 
*Read [[#How to refresh GNOME panel]]
*Read [[#How to refresh GNOME desktop]]
*Applications -> Sound & Video -> XMMS
 
==== Как установить мультимедиа плеер (amaroK) ====
 
*Прочтите [[#Общие замечания]]
*Прочтите [[#Как подключить дополнительные репозитарии?]]
*Прочтите [[#How to install Multimedia Codecs]]
 
sudo apt-get install amarok
 
*Applications -> Sound & Video -> amaroK
 
==== Как установить мультимедиа плеер (RealPlayer 10) ====
 
*Прочтите [[#Общие замечания]]
*Прочтите [[#Как подключить дополнительные репозитарии?]]
 
sudo apt-get install realplay
 
:Note: 'realplay' installs RealPlayer 10 from PLF repo. 'realplayer' installs RealPlayer 8 from multiverse.
 
*Read [[#How to refresh GNOME panel]]
*Applications -> Sound & Video -> RealPlayer 10
 
==== How to install Stream Directory Browser (streamtuner) ====
 
*Прочтите [[#Общие замечания]]
*Прочтите [[#Как подключить дополнительные репозитарии?]]
 
sudo apt-get install streamtuner
sudo apt-get install streamripper
 
*Read [[#How to refresh GNOME panel]]
*Applications -> Sound & Video -> streamtuner
 
==== Как установить музыкальный органайзер (Cowbell) ====
 
*Прочтите [[#Общие замечания]]
*Прочтите [[#Как подключить дополнительные репозитарии?]]
 
sudo apt-get install cowbell
 
*Applications -> Sound & Video -> Cowbell Music Organizer
 
==== Как установить редактор ID3-тэгов (EasyTAG) ====
 
*Прочтите [[#Общие замечания]]
*Прочтите [[#Как подключить дополнительные репозитарии?]]
 
sudo apt-get install easytag
 
*Прочтите [[#Как обновить панель GNOME?]]
*Applications -> Sound & Video -> EasyTAG
 
==== How to install Video Editor (Kino) ====
 
*Прочтите [[#Общие замечания]]
*Прочтите [[#Как подключить дополнительные репозитарии?]]
*Read [[#How to install Multimedia Codecs]]
 
sudo apt-get install kino
sudo apt-get install kinoplus
sudo apt-get install kino-timfx
sudo apt-get install kino-dvtitler
 
*Read [[#How to refresh GNOME panel]]
*Applications -> Sound & Video -> Kino Video Editor
 
==== How to install Audio Editor (Audacity) ====
 
*Прочтите [[#Общие замечания]]
*Прочтите [[#Как подключить дополнительные репозитарии?]]
*Read [[#How to install Multimedia Codecs]]
 
sudo apt-get install audacity
 
*Read [[#How to refresh GNOME panel]]
*Applications -> Sound & Video -> Audacity
 
==== How to install DVD Ripper (dvd::rip) ====
 
*Прочтите [[#Общие замечания]]
*Прочтите [[#Как подключить дополнительные репозитарии?]]
*Read [[#How to install Multimedia Codecs]]
*Read [[#How to install DVD playback capability]]
*Read [[#How to install Multimedia Player (MPlayer) with Plug-in for Mozilla Firefox]]
*Read [[#How to install RAR Archiver (rar)]]
 
sudo apt-get install dvdrip
sudo apt-get install vcdimager
sudo apt-get install cdrdao
sudo apt-get install subtitleripper
sudo ln -fs /usr/bin/rar /usr/bin/rar-2.80
sudo gedit /usr/share/applications/dvdrip.desktop
 
*Insert the following lines into the new file
 
[Desktop Entry]
Name=dvd::rip
Comment=dvd::rip
Exec=dvdrip
Icon=/usr/share/perl5/Video/DVDRip/icon.xpm
Terminal=false
Type=Application
Categories=Application;AudioVideo;
 
*Save the edited file
*Read [[#How to refresh GNOME panel]]
*Applications -> Sound & Video -> dvd::rip
 
==== How to install CD Ripper (Goobox) ====
 
*Прочтите [[#Общие замечания]]
*Прочтите [[#Как подключить дополнительные репозитарии?]]
*Read [[#How to install Multimedia Codecs]]
 
sudo apt-get install goobox
sudo rm -f /usr/share/applications/goobox.desktop
sudo gedit /usr/share/applications/goobox.desktop
 
*Insert the following lines into the new file
 
[Desktop Entry]
Name=CD Player & Ripper
Comment=Play and extract CDs
Exec=goobox
Icon=goobox.png
Terminal=false
Type=Application
Categories=Application;AudioVideo;
 
*Save the edited file
*Read [[#How to refresh GNOME panel]]
*Applications -> Sound & Video -> CD Player & Ripper
 
==== How to install Image Viewer (digiKam) ====
 
*Прочтите [[#Общие замечания]]
*Прочтите [[#Как подключить дополнительные репозитарии?]]
 
sudo apt-get install digikam
 
*Applications -> Graphics -> digikam
 
==== Как установить почтовый клиент (Mozilla Thunderbird) ====
 
*Прочтите [[#Общие замечания]]
*Прочтите [[#Как подключить дополнительные репозитарии?]]
 
sudo apt-get install mozilla-thunderbird
 
*Read [[#How to refresh GNOME panel]]
*Applications -> Internet -> Thunderbird Mail Client
 
==== How to install Newsreader (Pan) ====
 
*Прочтите [[#Общие замечания]]
 
wget -c http://www.users.on.net/~stubby/pan_0.99_i386.deb
sudo apt-get install libgmime2.1
sudo dpkg -i pan_0.99_i386.deb
 
*Read [[#How to refresh GNOME panel]]
*Applications -> Internet -> Pan Newsreader
 
==== How to install RSS/RDF/Atom Newsreader (RSSOwl) ====
 
*Прочтите [[#Общие замечания]]
*Прочтите [[#Как установить J2SE Runtime Environment (JRE) и плагин для Mozilla Firefox]]
 
wget -c http://easylinux.info/uploads/rssowl_linux_1_1_3_bin.tar.gz
sudo tar zxvf rssowl_linux_1_1_3_bin.tar.gz -C /opt/
sudo chown -R root:root /opt/rssowl_linux_1_1_3_bin/
sudo gedit /usr/bin/runRSSOwl.sh
 
*Insert the following lines into the new file
 
export MOZILLA_FIVE_HOME=/usr/lib/mozilla-firefox
export LD_LIBRARY_PATH=$LD_LIBRARY_PATH:${MOZILLA_FIVE_HOME}:${LD_LIBRARY_PATH}
cd /opt/rssowl_linux_1_1_3_bin/
./run.sh
 
*Сохраните отредактированный файл
 
sudo chmod +x /usr/bin/runRSSOwl.sh
sudo gedit /usr/share/applications/RSSOwl.desktop
 
*Insert the following lines into the new file
 
[Desktop Entry]
Name=RSSOwl
Comment=RSSOwl
Exec=runRSSOwl.sh
Icon=/opt/rssowl_linux_1_1_3_bin/rssowl.xpm
Terminal=false
Type=Application
Categories=Application;Network;
 
*Сохраните отредактированный файл
*Applications -> Internet -> RSSOwl
 
==== How to install Web Authoring System (Nvu) ====
 
*Прочтите [[#Общие замечания]]
*Прочтите [[#Как подключить дополнительные репозитарии?]]
 
sudo apt-get install nvu
sudo rm -f /usr/share/applications/nvu.desktop
sudo gedit /usr/share/applications/nvu.desktop
 
*Insert the following lines into the new file
 
[Desktop Entry]
Name=Nvu
Comment=Web Development Editor
Exec=nvu
Icon=nvu.xpm
Terminal=false
Type=Application
Categories=Application;Network;
 
*Save the edited file
*Read [[#How to refresh GNOME panel]]
*Applications -> Internet -> Nvu
 
====How to install Web Development Environment (quanta plus) ====
 
*Прочтите [[#Общие замечания]]
*Прочтите [[#Как подключить дополнительные репозитарии?]]
 
sudo apt-get install quanta
 
*Applications -> Programming -> Quanta Plus
 
==== How to install Project Management Application (Planner) ====
 
*Прочтите [[#Общие замечания]]
*Прочтите [[#Как подключить дополнительные репозитарии?]]
 
sudo apt-get install planner
 
*Read [[#How to refresh GNOME panel]]
*Applications -> Office -> Project Management
 
==== How to install Accounting Application (GnuCash) ====
 
*Прочтите [[#Общие замечания]]
*Прочтите [[#Как подключить дополнительные репозитарии?]]
 
sudo apt-get install gnucash
sudo rm -fr /usr/share/gnome/apps/Applications/
sudo gedit /usr/share/applications/GnuCash.desktop
 
*Insert the following lines into the new file
 
[Desktop Entry]
Name=GnuCash
Comment=GnuCash Personal Finance
Exec=gnucash
Icon=/usr/share/pixmaps/gnucash/gnucash-icon.png
Terminal=false
Type=Application
Categories=Application;Office;
 
*Save the edited file
*Read [[#How to refresh GNOME panel]]
*Applications -> Office -> GnuCash
 
==== How to install Desktop Publishing Application (Scribus) ====
 
*Прочтите [[#Общие замечания]]
*Прочтите [[#Как подключить дополнительные репозитарии?]]
 
sudo apt-get install scribus
 
*Read [[#How to refresh GNOME panel]]
*Applications -> Office -> Scribus
 
==== How to install Diagram Editor (Dia) ====
 
*Прочтите [[#Общие замечания]]
*Прочтите [[#Как подключить дополнительные репозитарии?]]
 
sudo apt-get install dia-gnome
 
*Read [[#How to refresh GNOME panel]]
*Applications -> Graphics -> Dia
 
==== How to install Compiled HTML Help (CHM) Viewer (xCHM) ====
 
*Прочтите [[#Общие замечания]]
*Прочтите [[#Как подключить дополнительные репозитарии?]]
 
sudo apt-get install xchm
 
*Read [[#How to refresh GNOME panel]]
*Applications -> Graphics -> xCHM
 
==== How to install CD/DVD Burning Application (GnomeBaker) ====
 
*Прочтите [[#Общие замечания]]
*Прочтите [[#Как подключить дополнительные репозитарии?]]
 
sudo apt-get install gnomebaker
 
*Read [[#How to refresh GNOME panel]]
*Applications -> Accessories -> GnomeBaker CD/DVD Creator
 
==== How to install CD/DVD Burning Application (K3b) ====
 
*Прочтите [[#Общие замечания]]
*Прочтите [[#Как подключить дополнительные репозитарии?]]
 
sudo apt-get install k3b k3b-mp3
 
*Applications -> Sound & Video -> K3b
 
==== How to install Dialup PPP Client (GNOME PPP) ====
 
*Прочтите [[#Общие замечания]]
*Прочтите [[#Как подключить дополнительные репозитарии?]]
 
sudo apt-get install gnome-ppp
 
*Read [[#How to refresh GNOME panel]]
*Applications -> Internet -> GNOME PPP
 
==== How to install Broadband ADSL/PPPoE Client (RP-PPPoE) ====
 
*Прочтите [[#Общие замечания]]
*Read [[#How to install Basic Compilers (build-essential)]]
 
wget -c http://easylinux.info/uploads/rp-pppoe-3.6.tar.gz
sudo tar zxvf rp-pppoe-3.6.tar.gz -C /opt/
sudo chown -R root:root /opt/rp-pppoe-3.6/
sudo gedit /usr/share/applications/RP-PPPoE.desktop
 
*Insert the following lines into the new file
 
[Desktop Entry]
Name=RP-PPPoE
Comment=RP-PPPoE
Exec=gksudo /opt/rp-pppoe-3.6/go-gui
Icon=
Terminal=false
Type=Application
Categories=Application;Network;
 
*Save the edited file
*Read [[#How to refresh GNOME panel]]
*Applications -> Internet -> RP-PPPoE
 
==== How to install Boot-Up Manager (BUM) ====
 
*Прочтите [[#Общие замечания]]
*Прочтите [[#Как подключить дополнительные репозитарии?]]
 
sudo apt-get install bum
 
*Read [[#How to refresh GNOME panel]]
*System -> Administration -> Boot-Up Manager
 
==== How to install Partition Editor (GParted) ====
 
*Прочтите [[#Общие замечания]]
*Прочтите [[#Как подключить дополнительные репозитарии?]]
 
sudo apt-get install gparted
 
*Read [[#How to refresh GNOME panel]]
*Applications -> System Tools -> GParted
 
==== How to install Firewall (Firestarter) ====
 
*Прочтите [[#Общие замечания]]
*Прочтите [[#Как подключить дополнительные репозитарии?]]
 
sudo apt-get install firestarter
 
*Read [[#How to refresh GNOME panel]]
*Applications -> System Tools -> Firestarter
 
==== How to install network traffic analyzer (Ethereal) ====
 
*Прочтите [[#Общие замечания]]
*Прочтите [[#Как подключить дополнительные репозитарии?]]
 
sudo apt-get install ethereal
 
*Applications -> Internet -> Ethereal
 
==== How to install Vulnerability Scanner (Nessus) ====
 
*Прочтите [[#Общие замечания]]
*Прочтите [[#Как подключить дополнительные репозитарии?]]
 
sudo apt-get install nessus
sudo apt-get install nessusd
sudo nessus-adduser
sudo ln -fs /etc/init.d/nessusd /etc/rc2.d/S20nessusd
sudo /etc/init.d/nessusd start
sudo gedit /usr/share/applications/Nessus.desktop
 
*Insert the following lines into the new file
 
[Desktop Entry]
Name=Nessus
Comment=Nessus
Exec=nessus
Icon=/usr/share/pixmaps/nessus.xpm
Terminal=false
Type=Application
Categories=Application;System;
 
*Save the edited file
*Read [[#How to refresh GNOME panel]]
*Applications -> System Tools -> Nessus
 
==== How to install RAR Archiver (rar) ====
 
*Прочтите [[#Общие замечания]]
*Прочтите [[#Как подключить дополнительные репозитарии?]]
 
sudo apt-get install rar
sudo ln -fs /usr/bin/rar /usr/bin/unrar
 
*Applications -> Accessories -> Archive Manager
 
==== How to install Extra Fonts ====
 
*Прочтите [[#Общие замечания]]
*Прочтите [[#Как подключить дополнительные репозитарии?]]
 
sudo apt-get install xfonts-intl-arabic
sudo apt-get install xfonts-intl-asian
sudo apt-get install xfonts-intl-chinese
sudo apt-get install xfonts-intl-chinese-big
sudo apt-get install xfonts-intl-european
sudo apt-get install xfonts-intl-japanese
sudo apt-get install xfonts-intl-japanese-big
sudo apt-get install xfonts-intl-phonetic
sudo apt-get install gsfonts-x11
sudo apt-get install msttcorefonts
sudo fc-cache -f -v
 
*Save the edited file
*Read [[#How to restart GNOME without rebooting computer]]
 
:''Note: Ubuntu Intrepid comes with the DejaVu fonts (derived from Bitstream Vera) and provides adequate support for Latin, Greek and Cyrillic based languages.''
 
==== How to install Chinese Input Method (SCIM) ====
 
'''The following advices are outdated and it could be hard to revert to normal afterwards. Please follow instead the official Ubuntu 6.06 Dapper Drake guide at
https://wiki.ubuntu.com/InputMethods/SCIM/CJK_Chinese_Japanese_Korean_Input_Method_configuration_using_SCIM_in_Ubuntu_6%2e06_Dapper_Drake'''
 
'''Please note that scim is now installed by default in Dapper, and installing Chinese, Japanese or Korean Support is done using System>Administration>Language Support. The wiki details the method more thoroughly'''
 
*Прочтите [[#Общие замечания]]
*Прочтите [[#Как подключить дополнительные репозитарии?]]
*Read [[#How to install Extra Fonts]]
 
sudo apt-get install scim
sudo apt-get install scim-chinese
sudo apt-get install scim-config-socket
sudo apt-get install scim-gtk2-immodule
sudo apt-get install scim-tables-zh
wget -c http://easylinux.info/uploads/fireflysung-1.3.0.tar.gz
sudo tar zxvf fireflysung-1.3.0.tar.gz -C /usr/share/fonts/truetype/
sudo chown -R root:root /usr/share/fonts/truetype/fireflysung-1.3.0/
sudo fc-cache -f -v
 
*System -> Preferences -> SCIM Input Method Setup
*To activate SCIM
 
Press 'Ctrl + Space'
 
==== How to install Desktop Applets (gDesklets) ====
 
*Прочтите [[#Общие замечания]]
*Прочтите [[#Как подключить дополнительные репозитарии?]]
 
sudo apt-get install gdesklets
sudo apt-get install gdesklets-data
 
*Read [[#How to refresh GNOME panel]]
*Applications -> Accessories -> gDesklets
*For more info see: http://gdesklets.gnomedesktop.org/
 
==== How to install Basic Compilers (build-essential) ====
 
*Прочтите [[#Общие замечания]]
*Прочтите [[#Как подключить дополнительные репозитарии?]]
 
sudo apt-get install build-essential
 
==== How to install Integrated Development Environment (Anjuta) ====
 
*Прочтите [[#Общие замечания]]
*Прочтите [[#Как подключить дополнительные репозитарии?]]
 
sudo apt-get install anjuta
 
*Applications -> Programming -> Anjuta IDE
 
==== How to install 3D modeling tool (Blender 3d) ====
 
*Прочтите [[#Общие замечания]]
*Прочтите [[#Как подключить дополнительные репозитарии?]]
 
sudo apt-get install blender
 
*Applications -> Graphics -> Blender 3D modeller
 
==== How to install game Tuxracer ====
 
*Прочтите [[#Общие замечания]]
*Прочтите [[#Как подключить дополнительные репозитарии?]]
 
sudo apt-get install planetpenguin-racer planetpenguin-racer-data planetpenguin-racer-extras
 
*Applications -> Games -> planetpenguin-racer
 
==== How to install game Frozen-Bubble ====
 
*Прочтите [[#Общие замечания]]
*Прочтите [[#Как подключить дополнительные репозитарии?]]
 
sudo apt-get install frozen-bubble
 
*Applications -> Games -> Frozen-Bubble
 
==== How to install game Scorched3D ====
 
*Прочтите [[#Общие замечания]]
*Прочтите [[#Как подключить дополнительные репозитарии?]]
 
sudo apt-get install scorched3d
sudo gedit /usr/share/applications/scorched3d.desktop
 
*Insert the following lines into the new file
 
[Desktop Entry]
Name=Scorched 3D
Comment=A 3D Remake Of Scorched Earth
Exec=scorched3d
Icon=
Terminal=false
Type=Application
Categories=Application;Game;ArcadeGame;
 
*Save the edited file
*Read [[#How to refresh GNOME panel]]
*Applications -> Games -> Scorched 3D
 
==== How to install virtual planetarium (Stellarium) ====
 
*Прочтите [[#Общие замечания]]
*Прочтите [[#Как подключить дополнительные репозитарии?]]
 
sudo apt-get install stellarium
sudo gedit /usr/share/applications/stellarium.desktop
 
*Insert the following lines into the new file
 
[Desktop Entry]
Name=Stellarium
Comment=Virtual planetarium
Exec=stellarium
Terminal=false
Type=Application
Categories=Application;Education;
 
*Applications -> Education -> Stellarium
 
==== How to install KDE Edutainment applications ====
 
*Прочтите [[#Общие замечания]]
*Прочтите [[#Как подключить дополнительные репозитарии?]]
 
sudo apt-get install kdeedu
 
*Applications -> Education -> ...
 
==== How to install Wine ====
 
*Прочтите [[#Общие замечания]]
*Прочтите [[#Как подключить дополнительные репозитарии?]]
 
sudo gedit /etc/apt/sources.list
 
*Add the following lines at the end of this file
 
# Repository for wine
deb http://wine.sourceforge.net/apt binary/
deb-src http://wine.sourceforge.net/apt source/
 
*Save the edited file
 
sudo apt-get update
sudo apt-get install wine
 
*For more info see http://www.winehq.com/
 
== Другие Рабочие Среды ==
 
==== Как установить KDE ====
 
*Прочтите [[#Общие замечания]]
*Прочтите [[#Как подключить дополнительные репозитарии?]]
*Вы также можете посмотреть [http://www.kde.org/screenshots/ KDE скриншоты]
 
sudo apt-get install kubuntu-desktop
 
:''Заметка: Для инсталяции нужно ~400Мб свободного места''
 
*System -> Log Out -> Log Out
*Чтобы войти в KDE нажмите на ''Sessions'' и выбирите KDE
 
==== Как установить XFCE ====
 
*Прочтите [[#Общие замечания]]
*Прочтите [[#Как подключить дополнительные репозитарии?]]
*Вы также можете посмотреть [http://www.xfce.org/index.php?page=screenshots&lang=en XFCE скриншоты]
 
sudo apt-get install xubuntu-desktop
 
*System -> Log Out -> Log Out
*Чтобы войти в XFCE нажмите на ''Sessions'' и выбирите XFCE
 
== Eye Candy ==
 
==== Как установить Xgl/Compiz (Nvidia)====
 
*Для полной информации как установить XGL на разных картах и некоторые хитрости смотрите: http://ubuntuforums.org/showthread.php?t=148351
 
 
*Прочтите [[#Общие замечания]]
*Прочтите [[#Как установить графический драйвер (NVIDIA)]]
 
 
sudo cp /etc/X11/xorg.conf /etc/X11/xorg.conf_backup
sudo gedit /etc/X11/xorg.conf
 
*Найдите эту секцию
 
Section "Module"
Load "i2c"
Load "bitmap"
...
Load "type1"
Load "vbe"
EndSection
 
*Закомментируйте dri и GLcore (если присутствуют)
 
# Load "dri"
# Load "GLcore"
 
*Убедитесь что glx модуль загружаеться
 
Load "glx"
 
*Найдите эту секцию (у вас может отличаться)
 
Section "Device"
Identifier "NVIDIA Corporation NV34M [GeForce FX Go5200]"
Driver "nv"
BusID "PCI:1:0:0"
EndSection
 
*Замените следующими строчками,оставив Identifier и BusID без изменений
 
Section "Device"
...
Driver "nvidia"
...
Option "RenderAccel" "true"
Option "AllowGLXWithComposite" "true"
EndSection
 
*Найдите эту секцию
 
Section "Screen"
Identifier "Default Screen"
Device "NVIDIA Corporation NV34M [GeForce FX Go5200]"
Monitor "Generic Monitor"
DefaultDepth 16
 
*Убедитесь что DefaultDepth установлен в 24
 
DefaultDepth 24
 
*Сохраните файл
*Установите Xgl/Compiz
 
sudo apt-get install compiz xserver-xgl libgl1-mesa xserver-xorg libglitz-glx1 compiz-gnome
sudo cp /etc/gdm/gdm.conf-custom /etc/gdm/gdm.conf-custom-backup
sudo gedit /etc/gdm/gdm.conf-custom
 
*Все замените на следующие строки
 
# GDM Configuration Customization file.
#
# This file is the appropriate place for specifying your customizations to the
# GDM configuration. If you run gdmsetup, it will automatically edit this
# file for you and will cause the daemon and any running GDM GUI programs to
# automatically update with the new configuration. Not all configuration
# options are supported by gdmsetup, so to modify some values it may be
# necessary to modify this file directly by hand.
#
# To hand-edit this file, simply add or modify the key=value combination in
# the appropriate section in the template below. Refer to the comments in the
# gdm.conf file for information about each option. Also refer to the reference
# documentation.
#
# If you hand edit a GDM configuration file, you should run the following
# command to get the GDM daemon to notice the change. Any running GDM GUI
# programs will also be notified to update with the new configuration.
#
# gdmflexiserver --command="UPDATE_CONFIG <configuration key>"
#
# For example, the "Enable" key in the "[debug]" section would be specified by
# "debug/Enable".
#
# You can also run gdm-restart or gdm-safe-restart to cause GDM to restart and
# re-read the new configuration settings. You can also restart GDM by sending
# a HUP or USR1 signal to the daemon. HUP behaves like gdm-restart and causes
# any user session started by GDM to exit immediately while USR1 behaves like
# gdm-safe-restart and will wait until all users log out before restarting GDM.
#
# For full reference documentation see the gnome help browser under
# GNOME|System category. You can also find the docs in HTML form on
# http://www.gnome.org/projects/gdm/
#
# NOTE: Lines that begin with "#" are considered comments.
#
# Have fun!
[daemon]
[security]
[xdmcp]
[gui]
[greeter]
[chooser]
[debug]
[servers]# Override display 1 to use Xgl
0=Xgl
[server-Xgl]
name=Xgl server
command=/usr/bin/Xgl :0 -fullscreen -ac -accel glx:pbuffer -accel xv:fbo
flexible=true
 
*Создайте скрипт который запускает Xgl/Compiz при загрузке
 
sudo gedit /usr/bin/thefuture
 
*Вставьте следующие строки в новый файл. Замените .us в соответствии с настройками клавиатуры для района. Например .uk для Англии. Если не уверены, оставьте .us
 
#!/bin/bash
gnome-window-decorator & compiz --replace gconf decoration wobbly fade minimize cube rotate zoom scale move resize place switcher &
xmodmap /usr/share/xmodmap/xmodmap.us
 
*Сохраните файл
 
sudo chmod 755 /usr/bin/thefuture
 
*Запустите compiz для текущей сессии
 
thefuture
 
*Для запуска compiz при загрузке
**System -> Preferences -> Sessions
**Startup Programs -> Add
 
/usr/bin/thefuture
 
**Нажмите Ok, потом Close
**Прочтите [[## Как перезапустить GNOME без перезагрузки компьютера?]]
 
*Проблемы
**Если кажеться, что Xgl/Compiz не работает, или возникают ошибки, просто перезагрузите компьютер после добавления "thefuture" в автозагрузку
**Если перемещение окон тормозит систему,запустите в терминале gconf-editor. Найдите apps/compiz/general/screen0/options. Отключите detect_refresh_rate и выставьте refresh rate в 60. Теперь все должно работать...
**Если вы используете не стандартную раскладку клавиатуры (другой язык), вам ,возможно, придется опять изменить ее на ту, что вам нужна в System/Settings/Keyboard.
**Там же вы можете установить Super-клавишу для кнопки окна.
 
*Подсказки
**Переключение окон = Alt + Tab
**Упорядочивание и просмотр всех окон = F12 включает или выключает; клик на окно фокусирует его
**Переключение рабочих столов на кубе = Ctrl + Alt + Стрелка Влево/Вправо
**Переключение рабочих столов на кубе - с перемещением активного окна = Ctrl + Shift + Alt + Стрелка Влево/Вправо
**Вращение куба = Ctrl + Alt + левый клик
**Изменение прозрачности = сейчас возможно только с помощью утилиты "transset"
**Приближение = Super-клавиша правый клик
**Увеличение = Super-клавиша + колесо мыши вверх
**Уменьшение = Super-клавиша + колесо мыши вниз
**Двигать окно = Alt + левый клик
**Прикрепление окна(цепляет к краю) = Ctrl + Alt + левый клик
**Изменение размера окна = Alt + правый клик
 
== Коммерческие приложения ==
 
==== Как установить Windows 9X/ME/2000/XP (Win4Lin) ====
 
*http://www.win4lin.com
 
==== Как установить программы для Windows (CrossOver Office) ====
 
*http://www.codeweavers.com
 
==== Как установить игры для Windows (Cedega) ====
 
*http://www.transgaming.com
 
== Администрирование пользователей ==
 
==== Как назначить/сменить/разрешить пароль пользователя root? ====
 
*Прочтите [[#Общие замечания]]
 
sudo passwd root
 
==== Как запретить учетную запись пользователя root? ====
 
*Прочтите [[#Общие замечания]]
 
sudo passwd -l root
 
==== Как разрешить пользователю root входить в сессию GNOME? ====
 
*Прочтите [[#Общие замечания]]
*Read [[#Как назначить/сменить/разрешить пароль пользователя root?]]
*System -> Administration -> Login Screen Setup
*Login Screen Setup
 
Security Tab -> Security -> Allow root to login with GDM ('''Checked''')
 
==== Как в консоли переключиться на пользователя root? ====
 
*Прочтите [[#Общие замечания]]
 
sudo -s -H
Password: <specify user password>
 
==== Как добавлять/изменять/удалять пользователей системы? ====
 
*Прочтите [[#Общие замечания]]
*System -> Administration -> Users and Groups
*Users and Groups
 
Users Tab -> Add User.../Properties/Delete
 
:'''или'''
 
sudo useradd jim
sudo userdel jim
 
*Для большей информации смотрите
 
man usermod
 
==== Как добавлять/изменять/удалять группы пользователей системы? ====
 
*Прочтите [[#Общие замечания]]
*System -> Administration -> Users and Groups
*Users and Groups
 
Groups Tab -> Add Group.../Properties/Delete
 
==== Как автоматически входить в сессию GNOME (небезопасно)? ====
 
*Прочтите [[#Общие замечания]]
*System -> Administration -> Login Screen Setup
*Login Screen Setup
 
General Tab -> Automatic Login ->
Login a user automatically on first bootup ('''Отметить''')
Automatic login username: '''Выбрать "имя пользователя"'''
 
 
==== Как разрешить другим пользователям вашей системы использовать sudo? ====
 
*Прочтите [[#Общие замечания]]
 
export EDITOR=gedit && sudo visudo
 
*В конец файла добавьте следующую строку
 
system_username ALL=(ALL) ALL
 
*Сохраните файл
 
==== Как использовать "sudo" без запроса пароля (небезопасно)? ====
 
*Прочтите [[#Общие замечания]]
 
export EDITOR=gedit && sudo visudo
 
*Найдите эту строку
 
...
system_username ALL=(ALL) ALL
...
 
*Замените на следующую строку
 
system_username ALL=(ALL) NOPASSWD: ALL
 
*Сохраните файл
 
==== Как гарантированно прервать "sudo"-сессию? ====
 
*Прочтите [[#Общие замечания]]
 
sudo -K
 
==== Как изменить права доступа к файлам/папкам? ====
 
*Прочтите [[#Общие замечания]]
 
Кликните правой кнопкой мыши на файлах/папках -> '''Properties'''
 
Permissions Tab -> Read/Write/Execute (Отметьте права для Owner/Group/Others)
 
==== Как изменить владельца файлов/папок? ====
 
*Прочтите [[#Общие замечания]]
 
sudo chown system_username /location_of_files_or_folders
 
==== Как изменить группу владельца файлов/папок? ====
 
*Прочтите [[#Общие замечания]]
 
sudo chgrp system_groupname /location_of_files_or_folders
 
==== Как использовать crontab ====
 
*Ниже указан формат файла crontab
 
------------- минуты (0 - 59)
| ----------- час (0 - 23)
| | --------- день месяца (1 - 31)
| | | ------- месяц (1 - 12)
| | | | ----- день недели (0 - 6) (Воскресенье=0)
| | | | |
* * * * * команда_для_запуска
 
*Запятая (',') определяет список значений, например: "1,3,4,7,8"
*Тире ('-') определяет диапазон значений, например: "1-6", что эквивалентно "1,2,3,4,5,6"
 
*Звездочка ('*') определяет все допустимые значения поля. Например, звездочка в поле часы будет эквивалентно значению 'каждый час'..
 
*Слэш ('/') может использоваться для пропуска данного числа значений. Например, "*/3" в поле часы эквивалентно строке "0,3,6,9,12,15,18,21"; "*" означает 'ежечасно', но "/3" устанавливает использовать только первое, четвертое, седьмое...и так далее значение определенное "*".
 
*Просмотр crontab
 
crontab -l
 
*Редактирование crontab
 
crontab -e
 
*Задания cron запускаются для каждого пользователя, однако, если вы хотите запускать команды cron от имени пользователя root используйте
 
sudo crontab -e
 
*Если результатом выполнения команды из crontab являются какие-то выходные данные, то демон cron обычно высылает эти данные пользователю по email. Что бы отключить данную функцию для любой специфичной команды, вы можете перенаправить вывод на /dev/null. Для отключения пересылки сообщений по email из crontab добавьте в строку вызова команды
 
> /dev/null 2>&1
 
*Это позволит перенаправить вывод на устройство /dev/null, однако, если возникнут ошибки, то вы их тоже не увидите:
 
=====Примеры заданий cron=====
 
*для выполнения команды (ls) вызываемой ежедневно в 4:30pm, добавьте следующую строку в cron:
 
30 16 * * * ls
 
*для выполнения команды (ls) вызываемой каждые 5 минут, добавьте следующую строку в cron:
 
*/5 * * * * ls
 
*для выполнения команды (ls) вызываемой каждую пятницу в 6:57am, добавьте следующую строку в cron:
 
57 6 * * 5 ls
 
*для выполнения команды (ls) вызываемой один раз в месяц в 2:38pm, добавьте следующую строку в cron:
 
38 14 1 * * ls
 
*для выполнения команды (echo "string") вызываемой по будням в 12:00pm, добавьте следующую строку в cron:
 
0 12 * * 1-5 echo "lunchtime"
 
*для выполнения команды (echo "string") вызываемой каждый раз 25-го декабря в 12:00am, добавьте следующую строку в cron:
 
0 0 25 12 * echo "CHRISTMAS TIME IS HERE!!!"
 
== Аппаратная часть ==
 
==== Как установить графический драйвер (NVIDIA) ====
 
*Прочтите [[#Общие замечания]]
*Прочтите [[#Как подключить дополнительные репозитарии?]]
 
sudo apt-get install nvidia-glx nvidia-kernel-common
 
*Прочтите [[#Как перезапустить GNOME без перезагрузки компьютера]]
 
==== How to disable NVIDIA graphics logo on GNOME startup ====
 
*Read [[#General Notes]]
*Read [[#How to install Graphics Driver (NVIDIA)]]
 
sudo cp /etc/X11/xorg.conf /etc/X11/xorg.conf_backup
sudo gedit /etc/X11/xorg.conf
 
*Find this section
 
...
Section "Device"
Identifier "NVIDIA Corporation NV11 [GeForce2 MX/MX 400]"
Driver "nvidia"
BusID "PCI:1:0:0"
...
 
*Add the following line below it
 
Option "NoLogo"
 
*Save the edited file
*Read [[#How to restart GNOME without rebooting computer]]
 
==== How to install Graphics Driver (ATI) ====
 
*See [http://wiki.cchtml.com/index.php/Ubuntu_Installation_Guide Unofficial ATI Linux driver wiki]
*Or [http://ubuntuforums.org/showpost.php?p=423584 Ubuntuforums.org]
 
==== Как определить чипсет Вашего модема ====
 
*Прочтите [[#Общие Замечания]]
*Как установить программу-определитель чипсета модема
*Прочтите [[#Как установить Basic Compilers (build-essential)]]
 
wget -c http://linmodems.technion.ac.il/packages/scanModem.gz
gunzip -c scanModem.gz > scanModem
chmod +x scanModem
./scanModem
 
==== How to install Modem Driver (SmartLink) ====
 
*Read [[#General Notes]]
*Read [[#How to add extra repositories]]
 
uname -r (must be 2.6.10-5-386)
wget -c http://easylinux.info/uploads/sl-modem-modules-2.6.10-5-386_2.9.9a-1ubuntu2+2.6.10-34_i386.deb
sudo dpkg -i sl-modem-modules-*.deb
sudo apt-get install sl-modem-daemon
 
==== How to configure PalmOS Devices ====
 
*Read [[#General Notes]]
 
sudo gedit /etc/udev/rules.d/10-custom.rules
 
*Insert the following line into the new file
 
BUS="usb", SYSFS{product}="Palm Handheld*", KERNEL="ttyUSB*", NAME{ignore_remove}="pilot", MODE="666"
 
*Save the edited file
*System -> Preferences -> PalmOS Devices
*Follow the instructions on screen
 
==== How to list partition tables ====
 
*Read [[#General Notes]]
 
sudo fdisk -l
 
*You can also use System -> Administration -> Disks
 
==== How to list filesystem disk space usage ====
 
*Read [[#General Notes]]
 
df -T -h
 
*You can also use System -> Administration -> Disks
 
==== Как получить список примонтированных устройств ====
 
*Читайте [[#General Notes]]
 
mount
 
 
==== Как монтировать ext3 раздел ====
Для того, чтобы монтировать ext3 раздел (например с адресом '''/dev/sdb2''' ), например в папку '''/home/user/ext3''' (папка должна быть создана), в терминале необходимо набрать следующее:
 
sudo mount -t ext3 /dev/sdb2 /home/user/ext3
 
Для того, чтобы получить полный доступ на раздел, а не только для чтения (read-only), необходимо выполнить следующую комманду:
 
sudo chmod 777 /home/alex/ext3
 
==== How to list PCI devices ====
 
*Read [[#General Notes]]
 
lspci
 
==== How to list USB devices ====
 
*Read [[#General Notes]]
 
lsusb
 
==== How to speed up CD/DVD-ROM ====
 
*Read [[#General Notes]]
 
:''e.g. Assumed that /dev/cdrom is the location of CD/DVD-ROM''
 
sudo hdparm -d1 /dev/cdrom
sudo cp /etc/hdparm.conf /etc/hdparm.conf_backup
sudo gedit /etc/hdparm.conf
 
*Append the following lines at the end of file
 
/dev/cdrom {
dma = on
}
 
*Save the edited file
 
==== How to mount/unmount CD/DVD-ROM manually, and show all hidden and associated files/folders ====
 
*Read [[#General Notes]]
 
:''e.g. Assumed that /media/cdrom0/ is the location of CD/DVD-ROM''
 
*To mount CD/DVD-ROM
 
sudo mount /media/cdrom0/ -o unhide
 
*To unmount CD/DVD-ROM
 
sudo umount /media/cdrom0/
 
==== How to forcefully unmount CD/DVD-ROM manually ====
 
*Read [[#General Notes]]
 
:''e.g. Assumed that /media/cdrom0/ is the location of CD/DVD-ROM''
 
sudo umount /media/cdrom0/ -l
 
==== How to remount /etc/fstab without rebooting ====
 
*Read [[#General Notes]]
 
sudo mount -a
 
 
==== How to install a Wacom tablet ====
 
'''For a detailed guide with screenshots about how to configure the "Extended input devices" in your graphic applications, please follow the official Dapper guide at https://wiki.ubuntu.com//Wacom '''
 
''With the version of the Linux Wacom driver (0.7.2) in Ubuntu 6.06 Dapper Drake, if you unplug you tablet, it won't function when you plug it back in and you will have to restart X. For this reason, it is best to leave the tablet plugged in. This limitation will be removed when the 0.7.4 version of the driver is included in Ubuntu.''
 
*Read [[#General Notes]]
 
* 1. Using Synaptic package manager1, check if the packages xserver-xorg-input-wacom and wacom-tools are already installed - if not, install them. If you prefer using the command line, you can also execute :
 
sudo apt-get install xserver-xorg-input-wacom wacom-tools
 
* 2. Save a copy of your /etc/X11/xorg.conf :
 
sudo cp /etc/X11/xorg.conf /etc/X11/xorg.conf.backup
 
* then edit it with the command line :
 
sudo gedit /etc/X11/xorg.conf
 
* and change all /dev/wacom occurences into /dev/input/wacom (created by wacom-tools udev scripts), then save the file.
 
*You should be ready to go after you have restarted X. Remember to configure the "Extended input devices" in your graphic applications (Gimp, Inkscape), however you can already check if it's working by moving your stylus on the tablet : the mouse cursor should go through the whole screen.
 
== Запись CD/DVD ==
 
==== Как очистить CD-RW/DVD-RW ====
 
*прочтите [[#General Notes]]
 
:''Предполагается, что CD/DVD-ROM монтирован в директорию /dev/cdrom''
 
sudo umount /dev/cdrom
cdrecord dev=/dev/cdrom blank=fast
 
==== Как сохранить файлы и папки на CD/DVD ====
 
*прочтите [[#General Notes]]
 
nautilus burn:///
 
*Файловый браузер: выберите "CD/DVD Creator"
 
*Выберите "Главное меню" -> "Записать диск" -> "Записать", затем перетащите в появившееся окно необходимые файлы и папки
 
==== How to burn Image (ISO) files into CD/DVD ====
 
*Read [[#General Notes]]
 
Right click on Image (ISO) file -> Write to Disc... -> Write
 
==== How to duplicate CD/DVD ====
 
*Read [[#General Notes]]
*Read [[#How to create Image (ISO) files from CD/DVD]]
*Read [[#How to burn Image (ISO) files into CD/DVD]]
 
==== How to create Image (ISO) files from CD/DVD ====
 
*Read [[#General Notes]]
 
:''e.g. Assumed that /dev/cdrom is the location of CD/DVD-ROM''
 
sudo umount /dev/cdrom
dd if=/dev/cdrom of=file.iso bs=1024
 
==== How to create Image (ISO) files from folders ====
 
*Read [[#General Notes]]
 
mkisofs -o file.iso /location_of_folder/
 
==== How to generate MD5 checksum files ====
 
*Read [[#General Notes]]
 
md5sum file.iso > file.iso.md5
 
==== How to check MD5 checksum of files ====
 
*Read [[#General Notes]]
 
:''e.g. Assumed that file.iso and file.iso.md5 are in the same folder''
 
md5sum -c file.iso.md5
 
==== How to mount/unmount Image (ISO) files without burning ====
 
*Read [[#General Notes]]
*To mount Image (ISO) file
 
sudo mkdir /media/iso
sudo modprobe loop
sudo mount file.iso /media/iso/ -t iso9660 -o loop
 
*To unmount Image (ISO) file
 
sudo umount /media/iso/
 
==== How to set/change the burn speed for CD/DVD Burner ====
 
*Read [[#General Notes]]
*Applications -> System Tools -> Configuration Editor
*Configuration Editor
 
/ -> apps -> nautilus-cd-burner -> default_speed (set/change the burn speed)
 
==== How to enable burnproof for CD/DVD Burner ====
 
*Read [[#General Notes]]
*Applications -> System Tools -> Configuration Editor
*Configuration Editor
 
/ -> apps -> nautilus-cd-burner -> burnproof ('''Checked''')
 
==== How to enable overburn for CD/DVD Burner ====
 
*Read [[#General Notes]]
*Applications -> System Tools -> Configuration Editor
*Configuration Editor
 
/ -> apps -> nautilus-cd-burner -> overburn ('''Checked''')
 
== Сеть ==
 
==== How to configure Google Talk ====
 
*See the answer at [http://www.google.com/support/talk/bin/answer.py?answer=24073 Google Talk Help Center]
 
==== How to activate/deactivate network connections ====
 
*Read [[#General Notes]]
*System -> Administration -> Networking
*Network settings
 
Connections Tab -> Select "Ethernet connection" -> Activate/Deactivate
 
==== How to configure network connections ====
 
*Read [[#General Notes]]
*System -> Administration -> Networking
*Network settings
 
Connections Tab -> Select "Ethernet connection" -> '''Properties'''
Connection -> Enable this connection ('''Checked''')
Connection Settings -> Configuration: Select "DHCP/Static IP address"
 
DNS Tab -> DNS Servers -> Add/Delete
 
*Read [[#How to activate/deactivate network connections]]
 
==== How to configure dialup connections ====
 
*Read [[#General Notes]]
*To configure dialup
 
sudo pppconfig
 
*To connect dialup
 
sudo pon provider_name
 
*To disconnect dialup
 
sudo poff
 
==== How to configure broadband connections ====
 
*Read [[#General Notes]]
 
sudo pppoeconf
 
==== How to change computer name ====
 
*Read [[#General Notes]]
*System -> Administration -> Networking
*Network settings
 
General Tab -> Host Settings -> Hostname: Specify the computer name
 
*Save and close all opened applications, Reboot computer
 
==== How to change computer descriptions ====
 
*Read [[#General Notes]]
*Read [[#How to install Samba Server for files/folders sharing service]]
sudo cp /etc/samba/smb.conf /etc/samba/smb.conf_backup
sudo gedit /etc/samba/smb.conf
 
*Find this line
 
...
server string = %h server (Samba, Ubuntu)
...
 
*Replace with the following line
 
server string = new_computer_descriptions
 
*Save the edited file
 
sudo testparm
sudo /etc/init.d/samba restart
 
==== How to change computer Domain/Workgroup ====
 
*Read [[#General Notes]]
*Read [[#How to install Samba Server for files/folders sharing service]]
 
sudo cp /etc/samba/smb.conf /etc/samba/smb.conf_backup
sudo gedit /etc/samba/smb.conf
 
*Find this line
 
...
workgroup = MSHOME
...
 
*Replace with the following line
 
workgroup = new_domain_or_workgroup
 
*Save the edited file
 
sudo testparm
sudo /etc/init.d/samba restart
 
==== How to assign Hostname to local machine with dynamic IP using free DynDNS service ====
 
*Read [[#General Notes]]
*Read [[#How to add extra repositories]]
*Register free Dynamic DNS at http://www.dyndns.com/services/dns/dyndns
sudo apt-get install ipcheck
sudo gedit /etc/ppp/ip-up.d/dyndns_update.sh
 
*Insert the following lines into the new file
<pre>
#!/bin/sh
 
USERNAME=myusername
PASSWORD=mypassword
HOSTNAME=myhostname.dyndns.org
 
cd /root/
if [ -f /root/ipcheck.dat ]; then
ipcheck -r checkip.dyndns.org:8245 $USERNAME $PASSWORD $HOSTNAME
else
ipcheck --makedat -r checkip.dyndns.org:8245 $USERNAME $PASSWORD $HOSTNAME
fi
</pre>
*Save the edited file
sudo chmod 700 /etc/ppp/ip-up.d/dyndns_update.sh
sudo sh /etc/ppp/ip-up.d/dyndns_update.sh
 
==== How to share folders the easy way ====
 
*Read [[#General Notes]]
*Read [[#How to install Samba Server for files/folders sharing service]]
 
Right click on folder -> Share folder
 
Shared folder -> Share with: Select "SMB"
Share properties -> Name: Specify the share name
 
==== How to browse network computers ====
 
*Read [[#General Notes]]
 
:''e.g. Assumed that network connections have been configured properly''
:'' If computers or network folders could not be found, try access them directly''
:'' Read [[#How to access network folders without mounting]]''
 
*Places -> Network Servers
 
==== How to access network folders without mounting ====
 
*Read [[#General Notes]]
 
:''e.g. Assumed that network connections have been configured properly''
:'' Network computer's IP: 192.168.0.1''
:'' Shared folder's name: linux''
 
*Press 'Alt+F2' (Run Application...) and enter:
 
smb://192.168.0.1/linux
 
==== How to mount/unmount network folders manually, and allow all users to read ====
 
*Read [[#General Notes]]
*Read [[#How to install Samba Server for files/folders sharing service]]
 
:''e.g. Assumed that network connections have been configured properly''
:'' Network computer's IP: 192.168.0.1''
:'' Network computer's Username: myusername''
:'' Network computer's Password: mypassword''
:'' Shared folder's name: linux''
:'' Local mount folder: /media/sharename''
 
*To mount network folder
 
sudo mkdir /media/sharename
sudo mount //192.168.0.1/linux /media/sharename/ -o username=myusername,password=mypassword
 
*To unmount network folder
 
sudo umount /media/sharename/
 
==== How to mount/unmount network folders manually, and allow all users to read/write ====
 
*Read [[#General Notes]]
*Read [[#How to install Samba Server for files/folders sharing service]]
 
:''e.g. Assumed that network connections have been configured properly''
:'' Network computer's IP: 192.168.0.1''
:'' Network computer's Username: myusername''
:'' Network computer's Password: mypassword''
:'' Shared folder's name: linux''
:'' Local mount folder: /media/sharename''
 
*To mount network folder
 
sudo mkdir /media/sharename
sudo mount //192.168.0.1/linux /media/sharename/ -o username=myusername,password=mypassword,dmask=777,fmask=777
 
*To unmount network folder
 
sudo umount /media/sharename/
 
==== How to mount network folders on boot-up, and allow all users to read ====
 
*Read [[#General Notes]]
*Read [[#How to install Samba Server for files/folders sharing service]]
 
:''e.g. Assumed that network connections have been configured properly''
:'' Network computer's IP: 192.168.0.1''
:'' Network computer's Username: myusername''
:'' Network computer's Password: mypassword''
:'' Shared folder's name: linux''
:'' Local mount folder: /media/sharename''
 
sudo mkdir /media/sharename
sudo gedit /root/.smbcredentials
 
*Insert the following lines into the new file
 
username=myusername
password=mypassword
 
*Save the edited file
sudo chmod 700 /root/.smbcredentials
sudo cp /etc/fstab /etc/fstab_backup
sudo gedit /etc/fstab
 
*Append the following line at the end of file
 
//192.168.0.1/linux /media/sharename smbfs credentials=/root/.smbcredentials 0 0
 
*Save the edited file
*Read [[#How to remount /etc/fstab without rebooting]]
 
==== How to mount network folders on boot-up, and allow all users to read/write ====
 
*Read [[#General Notes]]
*Read [[#How to install Samba Server for files/folders sharing service]]
 
:''e.g. Assumed that network connections have been configured properly''
:'' Network computer's IP: 192.168.0.1''
:'' Network computer's Username: myusername''
:'' Network computer's Password: mypassword''
:'' Shared folder's name: linux''
:'' Local mount folder: /media/sharename''
 
sudo mkdir /media/sharename
sudo gedit /root/.smbcredentials
 
*Insert the following lines into the new file
 
username=myusername
password=mypassword
 
*Save the edited file
 
sudo chmod 700 /root/.smbcredentials
sudo cp /etc/fstab /etc/fstab_backup
sudo gedit /etc/fstab
 
*Append the following line at the end of file
 
//192.168.0.1/linux /media/sharename smbfs credentials=/root/.smbcredentials,dmask=777,fmask=777 0 0
 
*Save the edited file
*Read [[#How to remount /etc/fstab without rebooting]]
 
==== How to get ipw2200 and wpa to work ====
 
*See [http://www.ubuntuforums.org/showpost.php?p=130227p=423584 Ubuntuforuns.org how-tos]
 
==== How to Configure and start PPTP tunnels (VPN) ====
 
*Read [[#General Notes]]
*Use [http://pptpclient.sourceforge.net/howto-ubuntu.phtml these instructions] to automatically install PPTP Client
:'''OR'''
*Install manually
 
wget -c http://linux.edu.lv/uploads/content/pptp.tar.gz
tar zxvf pptp.tar.gz
sudo sh ./pptp/install
 
*To configure PPTP Client
 
sudo gedit /usr/share/applications/pptpconfig.desktop
 
*Replace content of this file with the following lines
 
[Desktop Entry]
Name=PPTP Client
Comment=Configure and start PPTP tunnels (VPN)
Categories=Application;Network
Encoding=UTF-8
Exec=gksudo pptpconfig
Icon=gnome-remote-desktop.png
StartupNotify=true
Terminal=false
Type=Application
 
*The above lines change the default file in three ways: the application is placed in the Application/Internet category, gksudo will make the application run as superuser and we put a nice icon that appears in the menu.
*Start the client with ''Applications -> Internet -> PPTP Client''
 
==== How to configure Network-manager with WPA 1 and 2 support ====
 
== Удалённый рабочий стол ==
 
==== How to configure remote desktop (not secure) ====
 
*Read [[#General Notes]]
 
:''Warning! Remote Desktop will only work if there's a GNOME login session''
:'' Leaving computer with an unattended GNOME login session is not secure''
:'' Use (System -> Lock Screen) and switch off the monitor when computer is left unattended''
 
*System -> Preferences -> Remote Desktop
*Remote Desktop Preferences
 
Sharing ->
Allow other users to view your desktop ('''Checked''')
Allow other users to control your desktop ('''Checked''')
 
Security ->
Ask you for confirmation (Un-Checked)
Require the user to enter this password: ('''Checked''')
Password: Specify the password
 
==== How to connect into remote Ubuntu desktop ====
 
*Read [[#General Notes]]
 
:''e.g. Assumed that remote Ubuntu machine have configured Remote Desktop''
:'' Read [[#How to configure remote desktop (not secure)]]''
:'' Remote Ubuntu machine: 192.168.0.1''
 
vncviewer -fullscreen 192.168.0.1:0
 
*To quit vncviewer
 
Press 'F8' -> Quit viewer
 
==== How to connect into remote Ubuntu desktop via Windows machine ====
 
*Read [[#General Notes]]
 
:''e.g. Assumed that remote Ubuntu machine have configured Remote Desktop''
:'' Read [[#How to configure remote desktop (not secure)]]''
:'' Remote Ubuntu machine: 192.168.0.1''
 
*Download VNC Viewer: [http://fresh.t-systems-sfr.com/cgi-bin/warex?linux/src/vnc-4_1_1-x86_win32_viewer.zip:a/vnc-4_1_1-x86_win32_viewer.exe Here]
 
== Windows ==
 
==== How to mount/unmount Windows partitions (NTFS) manually, and allow all users to read only ====
 
*Read [[#General Notes]]
*Read [[#How to list partition tables]]
 
:''e.g. Assumed that /dev/hda1 is the location of Windows partition (NTFS)''
:'' Local mount folder: /media/windows''
 
*To mount Windows partition
 
sudo mkdir /media/windows
sudo mount /dev/hda1 /media/windows/ -t ntfs -o nls=utf8,umask=0222
 
*To unmount Windows partition
 
sudo umount /media/windows/
 
==== How to mount/unmount Windows partitions (FAT) manually, and allow all users to read/write ====
 
*Read [[#General Notes]]
*Read [[#How to list partition tables]]
 
:''e.g. Assumed that /dev/hda1 is the location of Windows partition (FAT)''
:'' Local mount folder: /media/windows''
 
*To mount Windows partition
 
sudo mkdir /media/windows
sudo mount /dev/hda1 /media/windows/ -t vfat -o iocharset=utf8,umask=000
 
*To unmount Windows partition
 
sudo umount /media/windows/
 
==== How to mount Windows partitions (NTFS) on boot-up, and allow all users to read only ====
 
*Read [[#General Notes]]
*Read [[#How to list partition tables]]
 
:''e.g. Assumed that /dev/hda1 is the location of Windows partition (NTFS)''
:'' Local mount folder: /media/windows''
 
sudo mkdir /media/windows
sudo cp /etc/fstab /etc/fstab_backup
sudo gedit /etc/fstab
 
*Append the following line at the end of file
 
/dev/hda1 /media/windows ntfs nls=utf8,umask=0222 0 0
 
*Save the edited file
*Read [[#How to remount /etc/fstab without rebooting]]
 
==== How to mount Windows partitions (FAT) on boot-up, and allow all users to read/write ====
 
*Read [[#General Notes]]
*Read [[#How to list partition tables]]
 
:''e.g. Assumed that /dev/hda1 is the location of Windows partition (FAT)''
:'' Local mount folder: /media/windows''
 
sudo mkdir /media/windows
sudo cp /etc/fstab /etc/fstab_backup
sudo gedit /etc/fstab
 
*Append the following line at the end of file
 
/dev/hda1 /media/windows vfat iocharset=utf8,umask=000 0 0
 
*Save the edited file
*Read [[#How to remount /etc/fstab without rebooting]]
 
 
== Безопасность ==
 
==== What are the basic things I need to know about securing my Ubuntu ====
 
*Read [[#General Notes]]
*Ensure hard drive is first in BIOS boot-up sequence
**To prevent trespassers from using Linux Installation CD which allows them to gain root user access
**To prevent trespassers from using Linux Live CD (e.g. UBUNTU/KNOPPIX/MEPIS) which allows them to destroy/browse/share the entire hard drive
**To prevent trespassers from installing another Operating System
*Ensure a password is set for BIOS
**To prevent trespassers from changing the BIOS boot-up sequence
*Ensure computer is located at a secured place
**To prevent trespassers from removing computer's hard drive which allows them to destroy/browse/share the entire hard drive from a different computer
**To prevent trespassers from removing computer's on-board battery which resets the BIOS password
*Ensure passwords used on the system cannot be easily guessed
**To prevent trespassers from cracking password file using brute force attacks (e.g. John the Ripper)
**Create password with minimum length of 8 characters
**Create password with mixture of characters/numbers, and upper/lower case
*Ensure interactive editing control for GRUB menu is disabled
**To prevent trespassers from modifying kernel boot-up arguments which allows them to have root user access
**Read [[#How to disable all interactive editing control for GRUB menu]]
*Ensure history listing is disabled in Console mode
**To prevent trespassers from seeing previously issued commands
**Read [[#How to disable history listing in Console mode]]
*Ensure Ctrl+Alt+Del is disabled in Console mode
**To prevent trespassers from restarting the system without permission in Console mode
**Read [[#How to disable Ctrl+Alt+Del from restarting computer in Console mode]]
*Ensure interactive option is set for remove, copy and move of files/folders in Console mode
**To prevent accidental removal/overwritten of files/folders
**Read [[#How to enable prompt before removal/overwritten of files/folders in Console mode]]
*For day to day usage, login as a normal user
**To prevent accidental deletion/modification of system files/folders
**Read [[#How to add/edit/delete system users]]
*Disable root user account, use "sudo" instead
**To reduce the amount of time spent with root privileges, and thus the risk of inadvertently executing a command as root
**"sudo" provides a more useful audit trail (/var/log/auth.log)
**Read [[#How to disable root user account]]
*Install a Firewall
**A firewall does not guarantee security but it is in most environments the first line of defense against network based attacks
**Read [[#How to install Firewall (Firestarter)]]
*Perform vulnerability test
**Nessus is a great tool designed to automate the testing and discovery of known security problems
**Read [[#How to install Vulnerability Scanner (Nessus)]]
 
==== How to disable all interactive editing control for GRUB menu ====
 
*Read [[#General Notes]]
grub
 
grub> md5crypt
Password: ****** (ubuntu)
Encrypted: $1$ZWnke0$1fzDBVjUcT1Mpdd4u/T961 (encrypted password)
grub> quit
 
sudo cp /boot/grub/menu.lst /boot/grub/menu.lst_backup
sudo gedit /boot/grub/menu.lst
 
*Find this section
 
...
## password ['--md5'] passwd
# If used in the first section of a menu file, disable all interactive editing
# control (menu entry editor and command-line) and entries protected by the
# command 'lock'
# e.g. password topsecret
# password --md5 $1$gLhU0/$aW78kHK1QfV3P2b2znUoe/
# password topsecret
...
 
*Add the following line below it
 
password --md5 $1$ZWnke0$1fzDBVjUcT1Mpdd4u/T961 (encrypted password above)
 
*Find this section
 
...
title Ubuntu, kernel 2.6.10-5-386 (recovery mode)
root (hd0,1)
kernel /boot/vmlinuz-2.6.10-5-386 root=/dev/hda2 ro single
initrd /boot/initrd.img-2.6.10-5-386
savedefault
boot
...
 
*Replace with the following lines
 
#title Ubuntu, kernel 2.6.10-5-386 (recovery mode)
#root (hd0,1)
#kernel /boot/vmlinuz-2.6.10-5-386 root=/dev/hda2 ro single
#initrd /boot/initrd.img-2.6.10-5-386
#savedefault
#boot
 
*Save the edited file
 
==== How to disable history listing in Console mode ====
 
*Read [[#General Notes]]
 
rm -f $HOME/.bash_history
touch $HOME/.bash_history
chmod 000 $HOME/.bash_history
 
==== How to disable Ctrl+Alt+Del from restarting computer in Console mode ====
 
*Read [[#General Notes]]
 
sudo cp /etc/inittab /etc/inittab_backup
sudo gedit /etc/inittab
 
*Find this line
 
...
ca:12345:ctrlaltdel:/sbin/shutdown -t1 -a -r now
...
 
*Replace with the following line
 
#ca:12345:ctrlaltdel:/sbin/shutdown -t1 -a -r now
 
*Save the edited file
sudo telinit q
 
==== How to enable prompt before removal/overwritten of files/folders in Console mode ====
 
*Read [[#General Notes]]
 
sudo cp /etc/bash.bashrc /etc/bash.bashrc_backup
sudo gedit /etc/bash.bashrc
 
*Append the following lines at the end of file
 
alias rm='rm -i'
alias cp='cp -i'
alias mv='mv -i'
 
*Save the edited file
 
== Режим восстановления ==
 
==== How to gain root user access without login ====
 
*Read [[#General Notes]]
*Easiest method (will not work if GRUB menu password is set)
**Boot-up computer
**If GRUB menu is hidden, press 'Esc' to enter the GRUB menu
**Select
 
Ubuntu, kernel 2.6.10-5-386 (recovery mode)
 
**Press 'Enter' to boot
*Other methods
**Read [[#How to modify kernel boot-up arguments, to gain root user access]]
**Read [[#How to use Ubuntu Installation CD, to gain root user access]]
 
==== How to modify kernel boot-up arguments, to gain root user access ====
 
*Read [[#General Notes]]
*Boot-up computer
*If GRUB menu is hidden, press 'Esc' to enter the GRUB menu
*If GRUB password is set, press 'p' to unlock the GRUB menu
*Select
 
Ubuntu, kernel 2.6.10-5-386
 
*Press 'e' to edit the commands before booting
*Select
 
kernel /boot/vmlinuz-2.6.10-5-386 root=/dev/hda2 ro quiet splash
 
*Press 'e' to edit the selected command in the boot sequence
*Add "rw init=/bin/bash" to the end of the arguments
 
grub edit> kernel /boot/vmlinuz-2.6.10-5-386 root=/dev/hda2 ro quiet splash rw init=/bin/bash
 
*Press 'b' to boot
 
==== How to use Ubuntu Installation CD, to gain root user access ====
 
*Read [[#General Notes]]
*Boot-up computer into Ubuntu Installation CD
*At "boot:" prompt, add "rescue" to the argument
 
boot: rescue
 
*Follow the instructions on screen
 
==== How to change root user/main user password if forgotten ====
 
*Read [[#General Notes]]
*Read [[#How to gain root user access without login]]
*To change root user password
 
# passwd root
 
*To change main user password
 
# passwd system_main_username
 
==== How to change GRUB menu password if forgotten ====
 
*Read [[#General Notes]]
 
grub
 
grub> md5crypt
Password: ****** (ubuntu)
Encrypted: $1$ZWnke0$1fzDBVjUcT1Mpdd4u/T961 (encrypted password)
grub> quit
 
sudo cp /boot/grub/menu.lst /boot/grub/menu.lst_backup
sudo gedit /boot/grub/menu.lst
 
*Find this line
 
...
password --md5 $1$gLhU0/$aW78kHK1QfV3P2b2znUoe/
...
 
*Replace with the following line
 
password --md5 $1$ZWnke0$1fzDBVjUcT1Mpdd4u/T961 (encrypted password above)
 
*Save the edited file
 
==== How to restore GRUB menu after Windows installation ====
 
*Read [[#General Notes]]
*Read [[#How to use Ubuntu Installation CD, to gain root user access]]
 
:''e.g. Assumed that /dev/hda is the location of /boot partition''
 
# grub-install /dev/hda
 
==== How to add Windows entry into GRUB menu ====
 
*Read [[#General Notes]]
*Read [[#How to list partition tables]]
 
:''e.g. Assumed that /dev/hda1 is the location of Windows partition''
 
sudo cp /boot/grub/menu.lst /boot/grub/menu.lst_backup
sudo gedit /boot/grub/menu.lst
 
*Append the following lines at the end of file
 
title Microsoft Windows
root (hd0,0)
savedefault
makeactive
chainloader +1
 
*Save the edited file
 
==== Как читать Linux-разделы (ext2, ext3, reiserfs) из-под Windows ====
 
*Прочтите [[#Общие замечания]]
*Скачайте Explore2fs: [http://easylinux.info/uploads/explore2fs-1.07.zip Here]
:или
*Посмотрите [http://www.fs-driver.org/index.html www.fs-driver.org]
 
== Советы и хитрости ==
 
==== Как перезапустить GNOME без перезагрузки компьютера ====
 
*Прочтите [[#Общие замечания]]
*Сохраните данные и закройте все запущенные приложения.
 
Нажмите 'Ctrl + Alt + Backspace'
:или
 
sudo /etc/init.d/gdm restart
 
==== Как включать Num Lock при запуске GNOME? ====
 
*Прочтите [[#Общие замечания]]
*Прочтите [[#Как подключить дополнительные репозитарии?]]
 
sudo apt-get install numlockx
sudo cp /etc/X11/gdm/Init/Default /etc/X11/gdm/Init/Default_backup
sudo gedit /etc/X11/gdm/Init/Default
 
*Найдите эту строку
 
...
exit 0
 
*Перед ней добавьте следующие строки
 
if [ -x /usr/bin/numlockx ]; then
/usr/bin/numlockx on
fi
 
*Сохраните файл
*Прочтите [[#Как перезапустить GNOME без перезагрузки компьютера]]
 
==== Как запускать программы при запуске GNOME? ====
 
*Прочтите [[#Общие замечания]]
*System -> Preferences -> Sessions
*Sessions
 
Startup Programs Tab -> Add/Edit/Delete
 
==== Как ускорить Убунту ====
 
*Читайте следующее сообщение: http://ubuntuforums.org/showthread.php?t=189192
 
==== Как переключиться в консольный режим из GNOME? ====
 
*Прочтите [[#Общие замечания]]
*Для переключения в консольный режим
 
Нажмите 'Ctrl + Alt + F1' (F2 - F6)
 
*Для переключения консолей в текстовом режиме
 
Нажмите 'Alt + F1' (F2 - F6)
 
*Для переключения обратно в GNOME
 
Нажмите 'Alt + F7'
 
==== Как отключить возможность перезапуска X в GNOME с помощью Ctrl+Alt+Backspace? ====
 
*Прочтите [[#Общие замечания]]
 
sudo cp /etc/X11/xorg.conf /etc/X11/xorg.conf_backup
sudo gedit /etc/X11/xorg.conf
 
*В конец файла добавьте следующие строки
 
Section "ServerFlags"
Option "DontZap" "yes"
EndSection
 
*Сохраните файл
*Прочтите [[#Как перезапустить GNOME без перезагрузки компьютера]]
 
==== Как в GNOME по нажатию Ctrl+Alt+Del запускать System Monitor? ====
 
*Прочтите [[#Общие замечания]]
 
gconftool-2 -t str --set /apps/metacity/global_keybindings/run_command_9 "<Control><Alt>Delete"
gconftool-2 -t str --set /apps/metacity/keybinding_commands/command_9 "gnome-system-monitor"
 
==== Как обновить рабочий стол GNOME? ====
 
*Прочтите [[#Общие замечания]]
 
killall nautilus
 
==== Как обновить панель GNOME? ====
 
*Прочтите [[#Общие замечания]]
 
killall gnome-panel
 
==== Как включить автосохранение в Gedit и отключить создание файлов вида some_file~ ====
 
*Прочтите [[#Общие замечания]]
*Applications -> System Tools -> Configuration Editor
*Configuration Editor
 
/ -> apps -> gedit-2 -> preferences -> editor -> save -> create_backup_copy ('''Снять отметку''')
/ -> apps -> gedit-2 -> preferences -> editor -> save -> auto_save ('''Отметить''')
 
==== Как в Nautilus показать все скрытые файлы/папки? ====
 
*Прочтите [[#Общие замечания]]
*Places -> Home Folder
*Чтобы временно показать все скрытые файлы/папки
 
Нажмите 'Ctrl + H'
 
*Чтобы скрытые файлы/папки показывались всё время
 
Edit Menu -> Preferences
 
Views Tab -> Default View -> Show hidden and backup files ('''Отметить''')
 
==== Как в Nautilus просматривать файлы/папки с правами пользователя root? ====
 
*Прочтите [[#Общие замечания]]
*Для установки File Browser (Root)
 
sudo gedit /usr/share/applications/Nautilus-root.desktop
 
**Вставьте следующие строки в новый файл
 
[Desktop Entry]
Name=File Browser (Root)
Comment=Browse the filesystem with the file manager
Exec=gksudo "nautilus --browser %U"
Icon=file-manager
Terminal=false
Type=Application
Categories=Application;System;
 
**Сохраните файл
**Прочтите [[#Как обновить панель GNOME?]]
 
*Для просмотра файлов/папок с правами пользователя root в Nautilus
**Applications -> System Tools -> File Browser (Root)
 
==== Как включить отображение иконок на рабочем столе (Компьютер, Домашняя папка, Корзина) ====
 
*Прочтите [[#Общие замечания]]
*Applications -> System Tools -> Configuration Editor
*Configuration Editor
 
/ -> apps -> nautilus -> desktop ->
computer_icon_visible ('''Отметить''')
home_icon_visible ('''Отметить''')
trash_icon_visible ('''Отметить''')
 
==== Как изменить программу, с помощью которой по умолчанию открываются файлы определенного типа? ====
 
*Прочтите [[#Общие замечания]]
 
Кликните правой кнопкой мыши на файле -> '''Properties'''
 
Open With Tab -> Add
Select "Open with" program
 
Select "Open with" program ('''Отметить''')
 
==== Как изменить почтовое приложение, используемое по умолчанию, на Mozilla Thunderbird? ====
 
*Прочтите [[#Общие замечания]]
*Прочтите [[#Как установить почтовый клиент (Mozilla Thunderbird)?]]
*System -> Preferences -> Preferred Applications
*Preferred Applications
 
Mail Reader Tab -> Default Mail Reader -> Command: mozilla-thunderbird %s
 
==== Как открыть файлы с правами пользователя root с помощью правой кнопки мыши? ====
 
*Прочтите [[#Общие замечания]]
 
gedit $HOME/.gnome2/nautilus-scripts/Open\ as\ root
 
*Вставьте следующие строки в новый файл
 
for uri in $NAUTILUS_SCRIPT_SELECTED_URIS; do
gksudo "gnome-open $uri" &
done
 
*Сохраните файл
 
chmod +x $HOME/.gnome2/nautilus-scripts/Open\ as\ root
 
Кликните правой кнопкой мыши на файле -> Scripts -> Open as root
 
==== Как запретить звук в терминальном режиме? ====
 
*Прочтите [[#Общие замечания]]
*Applications -> System Tools -> Terminal
*Terminal
 
Edit Menu -> Current Profile...
 
General Tab -> General -> Terminal bell ('''Не отмечено''')
 
==== Как ускорить загрузку веб-страниц в Mozilla Firefox? ====
 
*Прочтите [[#Общие замечания]]
*Applications -> Internet -> Firefox Web Browser
*Mozilla Firefox
 
Address Bar -> about:config
 
Filter: ->
network.dns.disableIPv6 -> true
network.http.pipelining -> true
network.http.pipelining.maxrequests -> 8
network.http.proxy.pipelining -> true
 
*Перезапустите Mozilla Firefox
 
==== Как отключить звук при быстром поиске ссылок на веб-страницах в Mozilla Firefox? ====
 
*Прочтите [[#Общие замечания]]
*Applications -> Internet -> Firefox Web Browser
*Mozilla Firefox
 
Address Bar -> about:config
 
Filter: -> accessibility.typeaheadfind.enablesound -> false
 
*Перезапустите Mozilla Firefox
 
==== Более простая замена apt-get (Synaptic) ====
 
*Прочтите [[#Общие замечания]]
*System -> Administration -> Synaptic Package Manager
*Чтобы подключить репозитарии Universe и Multiverse
*#Settings -> Репозитарии
 
*#В закладке Installation Media, нажимаем Add. Тут три разных репозитария; Intrepid Drake, Security Updates and Updates. Выбираем каждый репозитарий и отмечаем Officially supported, Restricted copyright, Community maintained (Universe) and Non-free (Multiverse). Убедитесь что вы нажали OK для каждого репозитария, чтобы сохранить изменения
*#Теперь вы должны видеть эти репозитарии под Channels.
 
*Чтобы добавить Backports и PLF (новые версии многий приложений. Нет поддержки. Могут содержать запрещеные пакеты. Используйте на собственный риск.)
*#Settings -> Repositories
*#Нажмите Add, потом Custom
*#Вставте следующие 4 строки в окно и нажмите Add Repository, для каждой линии:
deb http://archive.ubuntu.com/ubuntu intrepid-backports main restricted universe multiverse
deb-src http://archive.ubuntu.com/ubuntu intrepid-backports main restricted universe multiverse
 
deb http://packages.freecontrib.org/ubuntu/plf intrepid free non-free
deb-src http://packages.freecontrib.org/ubuntu/plf intrepid free non-free
 
*Обновить список пакетов (аналогично apt-get update)
 
Edit Menu -> Reload Package Information
 
*Установить все обновления ( apt-get upgrade)
 
Edit Menu -> Mark All Upgrades... -> Default Upgrade
Edit Menu -> Apply Marked Changes
 
*Поиск пакета ( apt-cache search package_name)
 
Edit Menu -> Search... Ввести имя пакета
 
*Установить выбранный пакет (аналогично apt-get install package_name)
 
Select "package_name"
Package Menu -> Mark for Installation
Edit Menu -> Apply Marked Changes
 
*Удалить выбранный пакет(аналогично apt-get remove package_name)
 
Select "package_name"
Package Menu -> Mark for Removal
Edit Menu -> Apply Marked Changes
 
==== Какие пакеты предоставляют дополнительные репозитарии ====
 
*Прочтите [[#Общие замечания]]
*Прочтите [[#Более простая замена apt-get (Synaptic)]]
 
* [http://packages.freecontrib.org/ubuntu/plf/ PLF]репозитарий предоставляет
*# воспроизведение DVD ([[:w: libdvdcss2|libdvdcss2]])
*# программа Skype
*# Sun Java SDK (Software Development Kit) and JRE (Java Runtime Environment)
*# Браузер Opera
*# Медиа-проигрыватель RealPlayer 10
*# Мультимедийные кодеки Win32
 
==== Как устанавливать/удалять пакеты .deb ====
 
*Прочтите [[#Общие замечания]]
*Для установки пакета .deb
 
sudo dpkg -i пакет.deb
 
*Для удаления пакета .deb
 
sudo dpkg -r название_пакета
 
==== Как конвертировать пакеты .rpm в пакеты .deb ====
 
*Прочтите [[#Общие замечания]]
 
sudo alien пакет.rpm
 
==== Как переименовать все файлы в каталоге одновременно ====
 
*Прочтите [[#Общие замечания]]
*Для установки програмы для переименования "mvb"
 
wget -c http://easylinux.info/uploads/mvb_1.6.tgz
sudo tar zxvf mvb_1.6.tgz -C /usr/share/
sudo chown -R root:root /usr/share/mvb_1.6/
sudo ln -fs /usr/share/mvb_1.6/mvb /usr/bin/mvb
*Для переименования всех файлов в каталоге
 
mvb НОВОЕ_ИМЯ
 
==== How to manipulate all image files in directory at once ====
 
*Прочтите [[#Общие замечания]]
*To install bash batch image processing script
**Read [[#How to add extra repositories]]
 
sudo apt-get install imagemagick
wget -c http://easylinux.info/uploads/bbips.0.3.2.sh
sudo cp bbips.0.3.2.sh /usr/bin/bbips
sudo chmod 755 /usr/bin/bbips
 
*To manipulate all image files in directory at once
 
bbips
 
==== How to set System-wide Environment Variables ====
 
*Прочтите [[#Общие замечания]]
 
sudo cp /etc/bash.bashrc /etc/bash.bashrc_backup
sudo gedit /etc/bash.bashrc
 
*Append the System-wide Environment Variables at the end of file
*Save the edited file
 
==== How to save "man" outputs into files ====
 
*Прочтите [[#Общие замечания]]
man command | col -b > file.txt
 
==== Как скрыть меню GRUB при загрузке ====
 
*Прочтите [[#Общие замечания]]
 
sudo cp /boot/grub/menu.lst /boot/grub/menu.lst_backup
sudo gedit /boot/grub/menu.lst
*Найдите эту строку
 
...
#hiddenmenu
...
 
*Замените на эту строку
 
hiddenmenu
 
*Сохраните файл
 
==== Как изменить продолжительность высвечивания меню GRUB при загрузке ====
 
*Прочтите [[#Общие замечания]]
 
sudo cp /boot/grub/menu.lst /boot/grub/menu.lst_backup
sudo gedit /boot/grub/menu.lst
 
*Найдите эту строку
 
...
timeout 3
...
 
*Здесь цифра 3 означает время в секундах. Измените это значение на свое усмотрение
 
timeout X_секунд
 
*Сохраните файл
 
==== Как изменить загружаемую по умолчанию Операционную систему в меню GRUB ====
 
*Прочтите [[#Общие замечания]]
 
sudo cp /boot/grub/menu.lst /boot/grub/menu.lst_backup
sudo gedit /boot/grub/menu.lst
 
*Найдите эту строку
 
...
default 0
...
 
*Здесь цифра 0 означает первую позицию в меню GRUB. Соответственно цифра 1 означает вторую позицию, цифра 2 третью и т.д. Измените цифру на позицию нужной ОС
 
default X_номер
 
*Сохраните файл
 
==== How to display Splash Image for GRUB menu on boot-up ====
 
*Прочтите [[#Общие замечания]]
 
:''e.g. Assumed that hd0,1 is the location of Ubuntu boot partition''
 
wget -c http://easylinux.info/uploads/ubuntu.xpm.gz
chmod 644 ubuntu.xpm.gz
sudo mkdir /boot/grub/images
sudo cp ubuntu.xpm.gz /boot/grub/images/
sudo cp /boot/grub/menu.lst /boot/grub/menu.lst_backup
sudo gedit /boot/grub/menu.lst
 
*Find this section
 
# menu.lst - See: grub(8), info grub, update-grub(8)
# grub-install(8), grub-floppy(8),
# grub-md5-crypt, /usr/share/doc/grub
# and /usr/share/doc/grub-doc/.
...
 
*Add the following line below it
 
splashimage (hd0,1)/boot/grub/images/ubuntu.xpm.gz
 
*Save the edited file
 
==== How to convert Wallpaper to Splash Image for GRUB menu ====
 
*Прочтите [[#Общие замечания]]
 
:''e.g. Assumed that wallpaper.png is the Wallpaper to be converted to Splash Image''
:'' splashimage.xpm.gz is the Splash Image for GRUB menu''
 
convert -resize 640x480 -colors 14 wallpaper.png splashimage.xpm && gzip splashimage.xpm
 
*Read [[#How to display Splash Image for GRUB menu on boot-up]] (use splashimage.xpm.gz instead of ubuntu.xpm.gz)
 
==== How to temporary skip boot-up services ====
 
*Прочтите [[#Общие замечания]]
 
Press 'Ctrl + C'
 
==== How to permanently disable/enable boot-up services ====
 
*Прочтите [[#Общие замечания]]
*Read [[#How to install Boot-Up Manager (BUM)]]
 
==== How to clean /tmp/ folder contents on shutdown ====
 
*Прочтите [[#Общие замечания]]
 
sudo cp /etc/init.d/sysklogd /etc/init.d/sysklogd_backup
sudo gedit /etc/init.d/sysklogd
 
*Find this section
 
...
stop)
log_begin_msg "Stopping system log daemon..."
start-stop-daemon --stop --quiet --oknodo --exec $binpath --pidfile $pidfile
log_end_msg $?
...
 
*Add the following line below it
 
rm -fr /tmp/* /tmp/.??*
 
*Save the edited file
 
==== How to scroll up and down to view previous outputs in Console mode ====
 
*Прочтите [[#Общие замечания]]
*To scroll up to view previously outputs
 
Press 'Shift + Page Up'
 
*To scroll down to view previously outputs
 
Press 'Shift + Page Down'
 
==== How to find out which version of Ubuntu I am using ====
 
cat /etc/issue
or
lsb_release -a
 
==== How to set up automatic background change (GNOME) ====
 
*Прочтите [[#Общие замечания]]
 
mkdir ~/.backgrounds
cd ~/.backgrounds
wget -c http://easylinux.info/uploads/change_background.py
chmod +x change_background.py
 
*To change desktop background every time you reboot your computer
export EDITOR=gedit && crontab -e
 
*Add the following line at the end of file
@reboot ~/.backgrounds/change_background.py
 
:For more information about periodic processes see
man 5 crontab
 
* ~/.backgrounds is hidden directory, see [[#How to show all hidden files/folders in Nautilus]]
*Copy images you wish to see on your background to ~/.backgrounds directory
 
==== How to set up automatic background change (KDE) ====
*Прочтите [[#Общие замечания]]
 
*Go to K-menu -> System Settings -> Desktop -> Background
*Choose Slide Show
*Press Setup...
*Press Add... to add pictures you wish to see as desktop background
*Set 'Change picture after' to desired picture rotation interval.
*Press 'OK'
 
==== How to add keyboard layouts for other languages ====
*Прочтите [[#Общие замечания]]
 
*Go to System -> Preferences -> Keyboard
*Choose Layouts
*Press Add... to add the secondary keyboard layout. It is simpler to have two layouts; the maximum is currently four for Xorg.
*Choose Layout Options
*Expand option Group Shift/Lock behaviour
*Choose the key combination that enables you to switch between keyboard layouts. The default is by pressing both Alt keys at the same time. A common alternative is to use Alt+Shift.
*Press Close.
 
See [[#How to add the Keyboard (Layout) Indicator applet]] to add the Keyboard Indicator applet.
 
==== How to add the Keyboard (Layout) Indicator applet ====
*Прочтите [[#Общие замечания]]
*Read [[#How to add keyboard layouts for other languages]]
 
*Right-click on empty space on the top panel so that you see the pop-up menu.
*Click Add to Panel...
*Choose Keyboard Indicator (it is under the Utilities section, at the end)
 
The Keyboard Indicator applet appears on the panel. The default language should be USA for U.S. English. You can either right-click on this applet for more options or see above on how to configure.
 
==== How to type extended characters ====
*Прочтите [[#Общие замечания]]
*Read [[#How to add keyboard layouts for other languages]]
*Read [[#How to add the Keyboard (Layout) Indicator applet]]
 
*Add the keyboard layout US English International (with dead keys)
*Make US English International (with dead keys) the default keyboard layout.
 
The key marked ['"] is now a dead key. When you press it, nothing happens. However if you press a consonant immediately afterwards, the consonant appears with an accent.
* ' + a = á
* ' + e = é
* and so on for i-í, o-ó, y-ý, c-ć, z-ź, n-ń, l-ĺ, u-ú, r-ŕ
 
* " + a = ä
* " + e = ë
* and so on for y-ÿ, u-ü, i-ï, o-ö
 
Similarly, ` and a consonant generates à, è, ù, ì, ò.
Similarly, ~ and a consonant generates ã, ũ, ĩ, õ, ñ.
 
To type ' and ", press RightAlt+' and RightAlt+" respectively.
To type ' and ", you may also press '+<space> and "+<space> respectively.
 
There are more characters available by keeping RightAlt pressed and typing a character. Therefore,
* RightAlt+q = ä
* RightAlt+w = å
* RightAlt+e = é
* RightAlt+r = ®
* RightAlt+t = þ
* RightAlt+y = ü
* RightAlt+u = ú
* RightAlt+i = í
* RightAlt+o = ó
* RightAlt+p = ö
* RightAlt+[ and ] for « and » respectively.
* RightAlt+a = á
* RightAlt+s = ß
* RightAlt+d = ð
* RightAlt+l = ø
* RightAlt+; = ¶
* RightAlt+: = °
* RightAlt+z = æ
* RightAlt+c = ©
* RightAlt+n = ñ
* RightAlt+m = µ
* RightAlt+, = ç
* RightAlt+/ = ¿
 
* RightAlt+1 = ¡
* RightAlt+2 = ²
* RightAlt+3 = ³
* RightAlt+4 = ¤
* RightAlt+5 = €
* RightAlt+6 = ¼
* RightAlt+7 = ½
* RightAlt+8 = ¾
* RightAlt+9 = ‘
* RightAlt+0 = ’
* RightAlt+- = ¥
* RightAlt+= = ×
 
* RightAlt+! = ¹
* RightAlt+@, then o = ő (and Ő).
* RightAlt+#, then a = ā (and Ā). Similarly for ēĒ, ūŪ, īĪ, ōŌ.
* RightAlt+$ = £
* RightAlt+% =
* RightAlt+^ =
* RightAlt+& =
* RightAlt+*, then a = ą (and Ą). Similarly for ęĘ, įĮ.
* RightAlt+(, then a = ă (and Ă)
* RightAlt+(, then g = ğ (and Ğ)
* RightAlt+), then a = å (and Å)
* RightAlt+_ =
* RightAlt++ = ÷
 
==== How to set the Compose key to type special characters ====
*Прочтите [[#Общие замечания]]
*Read [[#How to add keyboard layouts for other languages]]
*Read [[#How to add the Keyboard (Layout) Indicator applet]]
 
*Click '''System''', '''Preferences''', '''Keyboard'''.
*Under '''Layout Options''', expand on '''Compose key position'''.
*Choose '''Right-Win key is compose''', click Close.
 
Now you can type extended characters using the RightWin key (next to AltGr), according to [http://cvs.gnome.org/viewcvs/gtk%2B/gtk/gtkimcontextsimple.c?view=markup this keyboard settings file].
Specifically, the lines that start with ''GDK_Multi_key'' are those that we can use here. The '''Compose''' key is actually '''GDK_Multi_key'''.
 
Some examples,
*RightWin + C + = produces €
*RightWin + = + C produces €
*RightWin + C + O produces ©
*RightWin + O + C produces ©
*RightWin + a + ' produces á
*RightWin + a + " produces ä
*RightWin + a + ` produces à
*RightWin + a + ~ produces ã
*RightWin + a + * produces å
*RightWin + a + ^ produces â
*RightWin + a + > produces â
*RightWin + a + , produces ą
*RightWin + e + - produces ē
*RightWin + S + 1 produces ¹
*RightWin + S + 2 produces ²
*RightWin + S + 3 produces ³
 
== Серверы ==
 
=== Сервер Антивирус ===
 
==== Как установить сервер ClamAV Антивирус ====
 
*Прочтите [[#Общие замечания]]
*Прочтите [[#Как подключить дополнительные репозитарии?]]
 
sudo apt-get install clamav
 
==== Как вручную обновить антивирусную базу ====
 
*Прочтите [[#Общие замечания]]
*Прочтите [[#Как установить сервер ClamAV Антивирус]]
 
sudo freshclam
 
==== Как вручную проверять файлы/каталоги на вирусы ====
 
*Прочтите [[#Общие замечания]]
*Прочтите [[#Как установить сервер ClamAV Антивирус]]
 
sudo clamscan -r /location_of_files_or_folders
 
==== Как автоматически проверять файлы/каталоги на вирусы ====
 
*Прочтите [[#Общие замечания]]
*Прочтите [[#Как установить сервер ClamAV Антивирус]]
 
export EDITOR=gedit && sudo crontab -e
 
*Добавьте следующую строку в конце файлы
 
00 00 * * * sudo clamscan -r /расположение_файлов_или_каталогов
 
*Сохраните файл
 
=== Сервер печати (cupsd)===
*Прочтите [[#Общие замечания]]
*Прочтите [[#Как подключить дополнительные репозитарии?]]
 
==== Как установить сервер печати (cupsd) ====
 
:''Сервер печати Cupsd должен быть автоматически установлен во время стандартной установки системы. Проверить это можно по файлу "/etc/init.d/cupsys". Если хотите установить вручную, введите команду''
 
sudo apt-get install cupsys*
 
==== Как добавить принтер ====
 
:'' In gnome click on "System/Administration/Printing. And choose "Add printer". A "add printer wizard" should start and tell you what to do.''
 
==== Как печатать на удаленном компьютере с Ubuntu с другого компьютера с Ubuntu ====
 
*Убедитесь, что ваш локальный принтер настроен.
 
*IP-адрес сервера: 192.168.0.1
*IP-адрес клиента: 192.168.0.23
 
**Настройка сервера
 
sudo cp /etc/cups/cupsd.conf /etc/cups/cupsd.conf.backup
sudo gedit /etc/cups/cupsd.conf
 
:''найдите секцию''
 
<Location />
...
Allow localhost
...
</Location>
 
:''добавьте следующую строку.''
 
Allow 192.168.0.23
 
:''Перезагрузите системы печати.''
sudo /etc/init.d/cupsys restart
 
**Настройка клиента
 
sudo cp /etc/cups/client.conf /etc/cups/client.conf.backup
sudo gedit /etc/cups/client.conf
 
:''добавьте следующую строку.''
ServerName 192.168.0.1
 
:''Перезагрузите системы печати.''
sudo /etc/init.d/cupsys restart
 
:''Запустите команду "lpq" и вы должны увидеть что-то подобное''
 
username@ubuntu:~$ lpq
HPLJ6P is ready
no entries
 
==== Как печатать на удаленном компьютере с Ubuntu с другого компьютера с Windows(R) ====
*Прочтите [[#How to install Samba Server for files/folders sharing service ]]
*Прочтите [[#How to print on remote Ubuntu machine via samba]]
 
=== Сервер доступа к файлам (Samba) ===
 
==== Как установить сервер доступа к файлам (Samba) для обеспечения сервиса предоставления доступа к файлам по сети ====
 
*Прочтите [[#Общие замечания]]
*Прочтите [[#Как подключить дополнительные репозитарии?]]
 
sudo apt-get install samba
sudo apt-get install smbfs
 
==== Как добавлять/редактировать/удалять сетевых пользователей ====
 
*Прочтите [[#Общие замечания]]
*Прочтите [[#Как установить сервер доступа к файлам (Samba) для обеспечения сервиса предоставления доступа к файлам по сети]]
*Для добавления сетевого пользователя
**Прочтите [[#Как добавлять/изменять/удалять пользователей системы?]]
 
sudo smbpasswd -a system_username
sudo gedit /etc/samba/smbusers
 
**Вставьте следующую строку в новый файл
 
system_username = "сетевое_имя_пользователя"
 
**Сохраните файл
*Для редактирования сетевого пользователя
 
sudo smbpasswd -a системное_имя_пользователя
 
*Для удаления сетевого пользователя
 
sudo smbpasswd -x системное_имя_пользователя
 
==== Как разрешить доступ по сети к домашним каталогам пользователей в режиме "только для чтения" (Authentication=Yes) ====
 
*Прочтите [[#Общие замечания]]
*Прочтите [[#How to install Samba Server for files/folders sharing service]]
 
sudo cp /etc/samba/smb.conf /etc/samba/smb.conf_backup
sudo gedit /etc/samba/smb.conf
 
*Найдите эту строку
 
...
; security = user
...
 
*замените на следующие строки
 
security = user
username map = /etc/samba/smbusers
 
*Сохраните файл
*Прочтите [[#How to add/edit/delete network users]]
 
sudo testparm
sudo /etc/init.d/samba restart
 
==== Как разрешить доступ по сети к домашним каталогам пользователей в режиме "чтение/запись" (Authentication=Yes) ====
 
*Прочтите [[#Общие замечания]]
*Прочтите [[#Как установить сервер доступа к файлам (Samba) для обеспечения сервиса предоставления доступа к файлам по сети]]
 
sudo cp /etc/samba/smb.conf /etc/samba/smb.conf_backup
gksudo gedit /etc/samba/smb.conf
 
*Найдите эту строку
 
...
; security = user
...
 
*Замените на следующие строки
 
security = user
username map = /etc/samba/smbusers
 
*Найдите этот раздел
...
# By default, the home directories are exported read-only. Change next
# parameter to 'yes' if you want to be able to write to them.
writable = no
...
 
*Замените 'no` на 'yes`
 
# By default, the home directories are exported read-only. Change next
# parameter to 'yes' if you want to be able to write to them.
writable = yes
 
*Сохраните файл
*Прочтите [[#Как добавлять/редактировать/удалять сетевых пользователей]]
 
sudo testparm
sudo /etc/init.d/samba restart
 
==== Как разрешить доступ по сети к домашним каталогам пользователей в режиме "только чтение" (Authentication=Yes) ====
 
*Прочтите [[#Общие замечания]]
*Прочтите [[#Как установить сервер доступа к файлам (Samba) для обеспечения сервиса предоставления доступа к файлам по сети]]
 
sudo mkdir /home/group
sudo chmod 777 /home/group/
sudo cp /etc/samba/smb.conf /etc/samba/smb.conf_backup
sudo gedit /etc/samba/smb.conf
 
*Найдите эту строку
 
...
; security = user
...
 
*Замените на следующие строки
 
security = user
username map = /etc/samba/smbusers
 
*Добавьте эти строки в конец файла
 
[Group]
comment = Group Folder
path = /home/group
public = yes
writable = no
valid users = system_username1 system_username2
create mask = 0700
directory mask = 0700
force user = nobody
force group = nogroup
*Сохраните изменения файла
*Read [[#Как добавлять/редактировать/удалять сетевых пользователей]]
 
sudo testparm
sudo /etc/init.d/samba restart
 
==== How to share group folders with read/write permissions (Authentication=Yes) ====
 
*Прочтите [[#Общие замечания]]
*Прочтите [[#Как установить сервер доступа к файлам (Samba) для обеспечения сервиса предоставления доступа к файлам по сети]]
 
sudo mkdir /home/group
sudo chmod 777 /home/group/
sudo cp /etc/samba/smb.conf /etc/samba/smb.conf_backup
sudo gedit /etc/samba/smb.conf
 
*Найдите строку
 
...
; security = user
...
 
*Замените на следующие строки
 
security = user
username map = /etc/samba/smbusers
 
*Добавьте следующие строки в конце файла
 
[Group]
comment = Group Folder
path = /home/group
public = yes
writable = yes
valid users = system_username1 system_username2
create mask = 0700
directory mask = 0700
force user = nobody
force group = nogroup
 
*Сохраните файл
*Прочтите [[#Как добавлять/редактировать/удалять сетевых пользователей]]
 
sudo testparm
sudo /etc/init.d/samba restart
 
==== How to share public folders with read only permission (Authentication=Yes) ====
 
*Read [[#Общие замечания]]
*Read [[#Как установить сервер доступа к файлам (Samba) для обеспечения сервиса предоставления доступа к файлам по сети]]
 
sudo mkdir /home/public
sudo chmod 777 /home/public/
sudo cp /etc/samba/smb.conf /etc/samba/smb.conf_backup
sudo gedit /etc/samba/smb.conf
 
*Найдите строку
 
...
; security = user
...
 
*Замените на следующие строки
 
security = user
username map = /etc/samba/smbusers
 
*Добавьте следующие строки в конце файла
 
[public]
comment = Public Folder
path = /home/public
public = yes
writable = no
create mask = 0777
directory mask = 0777
force user = nobody
force group = nogroup
 
*Сохраните файл
*Прочтите [[#Как добавлять/редактировать/удалять сетевых пользователей]]
 
sudo testparm
sudo /etc/init.d/samba restart
 
==== How to share public folders with read/write permissions (Authentication=Yes) ====
 
*Read [[#Общие замечания]]
*Read [[#Как установить сервер доступа к файлам (Samba) для обеспечения сервиса предоставления доступа к файлам по сети]]
 
sudo mkdir /home/public
sudo chmod 777 /home/public/
sudo cp /etc/samba/smb.conf /etc/samba/smb.conf_backup
sudo gedit /etc/samba/smb.conf
 
*Найдите строку
 
...
; security = user
...
 
*Замените на следующие строки
 
security = user
username map = /etc/samba/smbusers
 
*Добавьте следующие строки в конце файла
 
[public]
comment = Public Folder
path = /home/public
public = yes
writable = yes
create mask = 0777
directory mask = 0777
force user = nobody
force group = nogroup
 
*Сохраните файл
*Прочтите [[#Как добавлять/редактировать/удалять сетевых пользователей]]
 
sudo testparm
sudo /etc/init.d/samba restart
 
==== How to share public folders with read only permission (Authentication=No) ====
 
*Read [[#Общие замечания]]
*Read [[#Как установить сервер доступа к файлам (Samba) для обеспечения сервиса предоставления доступа к файлам по сети]]
 
sudo mkdir /home/public
sudo chmod 777 /home/public/
sudo cp /etc/samba/smb.conf /etc/samba/smb.conf_backup
sudo gedit /etc/samba/smb.conf
 
*Найдите строку
 
...
; security = user
...
 
*Замените на следующие строки
 
security = share
 
*Добавьте следующие строки в конце файла
 
[public]
comment = Public Folder
path = /home/public
public = yes
writable = no
create mask = 0777
directory mask = 0777
force user = nobody
force group = nogroup
 
*Сохраните файл
*Прочтите [[#Как добавлять/редактировать/удалять сетевых пользователей]]
 
sudo testparm
sudo /etc/init.d/samba restart
 
==== How to share public folders with read/write permissions (Authentication=No) ====
 
*Read [[#Общие замечания]]
*Read [[#Как установить сервер доступа к файлам (Samba) для обеспечения сервиса предоставления доступа к файлам по сети]]
 
sudo mkdir /home/public
sudo chmod 777 /home/public/
sudo cp /etc/samba/smb.conf /etc/samba/smb.conf_backup
sudo gedit /etc/samba/smb.conf
 
*Найдите строку
 
...
; security = user
...
 
*Замените на следующие строки
 
security = share
 
*Добавьте следующие строки в конце файла
 
[public]
comment = Public Folder
path = /home/public
public = yes
writable = yes
create mask = 0777
directory mask = 0777
force user = nobody
force group = nogroup
*Сохраните файл
*Прочтите [[#Как добавлять/редактировать/удалять сетевых пользователей]]
sudo testparm
sudo /etc/init.d/samba restart
 
==== How to print on remote Ubuntu machine via samba ====
*Read [[#Print Server (cupsd)]]
*Make sure your Ubuntu printers are configured properly.
 
sudo cp /etc/samba/smb.conf /etc/samba/smb.conf.backup
gedit /etc/samba/smb.conf
 
:''Find the following lines''
 
...
# printing = cups
# printcap name = cups
...
 
:'' and uncomment them.''
printing = cups
printcap name = cups
 
:''Restart cups server''
sudo /etc/init.d/cupsys restart
 
:'' Now printers working on your Ubuntu machine should be acessible via samba.''
 
=== SSH Server ===
 
==== How to install SSH Server for remote administration service ====
 
*Read [[#General Notes]]
*Read [[#How to add extra repositories]]
 
sudo apt-get install ssh
 
==== How to SSH into remote Ubuntu machine ====
 
*Read [[#General Notes]]
 
:''e.g. Assumed that remote Ubuntu machine have installed SSH Server service''
:'' Read [[#How to install SSH Server for remote administration service]]''
:'' Remote Ubuntu machine: 192.168.0.1''
 
ssh username@192.168.0.1
 
==== How to copy files/folders from remote Ubuntu machine into local machine (scp) ====
 
*Read [[#General Notes]]
 
:''e.g. Assumed that remote Ubuntu machine have installed SSH Server service''
:'' Read [[#How to install SSH Server for remote administration service]]''
:'' Remote Ubuntu machine: 192.168.0.1''
:'' Remote files/folders location: /home/username/remotefile.txt''
:'' Local machine save location: . (current directory)''
 
scp -r username@192.168.0.1:/home/username/remotefile.txt .
 
==== How to copy files/folders from local machine into remote Ubuntu machine (scp) ====
 
*Read [[#General Notes]]
 
:''e.g. Assumed that remote Ubuntu machine have installed SSH Server service''
:'' Read [[#How to install SSH Server for remote administration service]]''
:'' Local files/folders location: localfile.txt''
:'' Remote Ubuntu machine: 192.168.0.1''
:'' Remote Ubuntu machine save location: /home/username/''
 
scp -r localfile.txt username@192.168.0.1:/home/username/
 
==== How to copy files/folders from remote Ubuntu machine into local machine (rsync) ====
 
*Read [[#General Notes]]
 
:''e.g. Assumed that remote Ubuntu machine have installed SSH Server service''
:'' Read [[#How to install SSH Server for remote administration service]]''
:'' Remote Ubuntu machine: 192.168.0.1''
:'' Remote files/folders location: /home/username/remotefile.txt''
:'' Local machine save location: . (current directory)''
 
rsync -v -u -a --delete --rsh=ssh --stats username@192.168.0.1:/home/username/remotefile.txt .
 
==== How to copy files/folders from local machine into remote Ubuntu machine (rsync) ====
 
*Read [[#General Notes]]
 
:''e.g. Assumed that remote Ubuntu machine have installed SSH Server service''
:'' Read [[#How to install SSH Server for remote administration service]]''
:'' Local files/folders location: localfile.txt''
:'' Remote Ubuntu machine: 192.168.0.1''
:'' Remote Ubuntu machine save location: /home/username/''
 
rsync -v -u -a --delete --rsh=ssh --stats localfile.txt username@192.168.0.1:/home/username/
 
==== How to mount remote folders into local Ubuntu machine (sshfs) ====
 
*Read [[#General Notes]]
 
:''e.g. Assumed that remote machine has installed SSH Server service''
:'' Read [[#How to install SSH Server for remote administration service]]''
:'' Remote machine: 192.168.0.1''
:'' Remote machine folder location: /media/music''
 
*Install sshfs
 
sudo apt-get install sshfs
 
*Load kernel driver for sshfs
 
sudo modprobe fuse
 
*For permanent use add 'fuse' at the end of /etc/modules
 
sudo gedit /etc/modules
 
*Join the 'fuse' user group
sudo adduser your_user_name fuse
 
*Create local mountpoint in your home directory
 
mkdir ~/remote_music
 
*Mount the remote folder into ~/remote_music
 
sshfs 192.168.0.1:/meida/music ~/remote_music
 
==== Как получить доступ к Ubuntu-машине из Windows через SSH ====
 
*Прочтите [[#General Notes]]
 
:''Предполагается, что на Ubuntu-системе установлен сервер SSH (sshd)''
:'' Прочтите [[#How to install SSH Server for remote administration service]]''
 
*Скачайте PuTTY: [http://the.earth.li/~sgtatham/putty/latest/x86/putty.exe отсюда]
 
==== How to copy files/folders from/into remote Ubuntu machine via Windows machine ====
 
*Read [[#General Notes]]
 
:''e.g. Assumed that remote Ubuntu machine have installed SSH Server service''
:'' Read [[#How to install SSH Server for remote administration service]]''
 
*Download FileZilla: [http://prdownloads.sourceforge.net/filezilla/FileZilla_2_2_18_setup.exe?download Here]
 
==== How to limit the user accounts that can connect through ssh remotely ====
 
*Read [[#General Notes]]
 
:''e.g. If you enable the SSH server, then any user with a valid account can connect remotely''
:'' This can lead to security risks, as there exist remote password cracking tools that''
:'' try common username/password pairs. ''
 
*Keep a backup of the ssh server configuration file with
''sudo cp /etc/ssh/sshd_config /etc/ssh/sshd_config.ORIGINAL''
*Edit the configuration file
''sudo gedit /etc/ssh/sshd_config''
*Change the parameter ''PermitRootLogin'' from ''yes'' to ''no''. The superuser must not be able to connect directly from remote.
*Add the parameter ''AllowUsers'' and specify the usernames (space separated) that can connect remotely.
*You can also use ''DenyUsers'' for fine-grained selection of users.
*If you enable the openssh server and you have no intention for now to enable remote connections, you may add ''AllowUsers nosuchuserhere'' to disable anyone connecting.
 
=== DHCP Server ===
 
==== How to install DHCP Server for automatic IP addresses assignment ====
 
*Read [[#General Notes]]
*Read [[#How to add extra repositories]]
 
:''e.g. Assumed that "eth0" is the interface for network card''
:'' IP Address Range: 192.168.0.100 to 192.168.0.200''
:'' Subnet Mask: 255.255.255.0''
:'' DNS Servers: 202.188.0.133, 202.188.1.5''
:'' Domains: tm.net.my''
:'' Gateway Address: 192.168.0.1''
 
sudo apt-get install dhcp3-server
sudo cp /etc/default/dhcp3-server /etc/default/dhcp3-server_backup
sudo gedit /etc/default/dhcp3-server
 
*Find this line
 
...
INTERFACES=""
 
*Replace with the following line
 
INTERFACES="eth0"
 
*Save the edited file
 
sudo cp /etc/dhcp3/dhcpd.conf /etc/dhcp3/dhcpd.conf_backup
sudo gedit /etc/dhcp3/dhcpd.conf
 
*Find this section
 
...
# option definitions common to all supported networks...
option domain-name "example.org";
option domain-name-servers ns1.example.org, ns2.example.org;
 
default-lease-time 600;
max-lease-time 7200;
...
 
*Replace with the following lines
 
# option definitions common to all supported networks...
#option domain-name "example.org";
#option domain-name-servers ns1.example.org, ns2.example.org;
 
#default-lease-time 600;
#max-lease-time 7200;
 
*Find this section
 
...
# A slightly different configuration for an internal subnet.
#subnet 10.5.5.0 netmask 255.255.255.224 {
# range 10.5.5.26 10.5.5.30;
# option domain-name-servers ns1.internal.example.org;
# option domain-name "internal.example.org";
# option routers 10.5.5.1;
# option broadcast-address 10.5.5.31;
# default-lease-time 600;
# max-lease-time 7200;
#}
...
 
*Replace with the following lines
 
# A slightly different configuration for an internal subnet.
subnet 192.168.0.0 netmask 255.255.255.0 {
range 192.168.0.100 192.168.0.200;
option domain-name-servers 202.188.0.133, 202.188.1.5;
option domain-name "tm.net.my";
option routers 192.168.0.1;
option broadcast-address 192.168.0.255;
default-lease-time 600;
max-lease-time 7200;
}
 
*Save the edited file
 
sudo /etc/init.d/dhcp3-server restart
 
 
=== Database Server ===
 
==== How to install MYSQL Database Server ====
 
*Read [[#General Notes]]
*Read [[#How to add extra repositories]]
 
sudo apt-get install mysql-server
mysqladmin -u root password db_user_password
 
==== How to install MYSQL Administrator ====
 
*Read [[#General Notes]]
*Read [[#How to add extra repositories]]
*Read [[#How to install MYSQL Database Server]]
 
sudo apt-get install mysql-admin
 
*Read [[#How to refresh GNOME panel]]
*Applications -> System Tools -> MySQL Administrator
 
=== Apache HTTP Server ===
 
==== How to install Apache HTTP Server for HTTP (Web) Server service ====
 
*Read [[#General Notes]]
*Read [[#How to add extra repositories]]
 
sudo apt-get install apache2
 
*http://localhost
 
==== How to install PHP for Apache HTTP Server ====
 
*Read [[#General Notes]]
*Read [[#How to add extra repositories]]
*Read [[#How to install Apache HTTP Server for HTTP (Web) Server service]]
 
sudo apt-get install php4
sudo /etc/init.d/apache2 restart
sudo gedit /var/www/testphp.php
 
*Insert the following line into the new file
 
<?php phpinfo(); ?>
 
*Save the edited file
*http://localhost/testphp.php
 
==== How to install MYSQL for Apache HTTP Server ====
 
*Read [[#General Notes]]
*Read [[#How to add extra repositories]]
*Read [[#How to install Apache HTTP Server for HTTP (Web) Server service]]
*Read [[#How to install PHP for Apache HTTP Server]]
*Read [[#How to install MYSQL Database Server]]
 
sudo apt-get install libapache2-mod-auth-mysql
sudo apt-get install php4-mysql
sudo /etc/init.d/apache2 restart
 
==== How to map URLs to folders outside /var/www/ ====
 
*Read [[#General Notes]]
*Read [[#How to install Apache HTTP Server for HTTP (Web) Server service]]
 
sudo gedit /etc/apache2/conf.d/alias
 
*Insert the following lines into the new file
 
Alias /URL-path /location_of_folder/
 
<Directory /location_of_folder/>
Options Indexes FollowSymLinks
AllowOverride All
Order allow,deny
Allow from all
</Directory>
 
*Save the edited file
 
sudo /etc/init.d/apache2 restart
 
*http://localhost/URL-path
 
==== How to change the default port number for Apache HTTP Server ====
 
*Read [[#General Notes]]
*Read [[#How to install Apache HTTP Server for HTTP (Web) Server service]]
 
:''e.g. Assumed that new port number is 78''
 
sudo cp /etc/apache2/ports.conf /etc/apache2/ports.conf_backup
sudo gedit /etc/apache2/ports.conf
 
*Find this line
 
Listen 80
 
*Replace with the following line
 
Listen 78
 
*Save the edited file
 
sudo /etc/init.d/apache2 restart
 
*http://localhost:78
 
==== How to parse RSS into PHP for Apache HTTP Server ====
 
*Read [[#General Notes]]
*Read [[#How to install Apache HTTP Server for HTTP (Web) Server service]]
*Read [[#How to install PHP for Apache HTTP Server]]
 
:''e.g. Assumed that RSS is DistroWatch.com - News''
 
wget -c http://easylinux.info/uploads/magpierss-0.71.1.tar.gz
sudo mkdir /var/www/feeds
sudo tar zxvf magpierss-0.71.1.tar.gz -C /var/www/feeds/
sudo mv /var/www/feeds/magpierss-0.71.1/* /var/www/feeds/
sudo rm -fr /var/www/feeds/magpierss-0.71.1/
sudo chown -R www-data:root /var/www/feeds/
sudo gedit /var/www/feeds/index.php
 
*Insert the following lines into the new file
 
<nowiki>
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Strict//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-strict.dtd">
<html xmlns="http://www.w3.org/1999/xhtml" lang="en" xml:lang="en">
<head>
<title>DistroWatch.com - News</title>
<meta http-equiv="Content-Type" content="text/html; charset=iso-8859-1"/>
<style type="text/css">
/*<![CDATA[*/
/*
DEFAULT TAG STYLES
*/
body {
background: #ffffff;
margin-left: 20px;
font-family: bitstream vera sans,sans-serif;
font-size: 9pt;
}
h1 {
font-family: luxi sans,sans-serif;
font-size: 15pt;
}
/*]]>*/
</style>
</head>
<body>
<?php
 
require_once 'rss_fetch.inc';
error_reporting(E_ERROR);
$url = 'http://distrowatch.com/news/dw.xml';
$rss = fetch_rss($url);
if ($rss) {
echo "<h1>";
echo "<a href=$url>", $rss->channel[title], "</a><br/>";
echo "</h1>";
foreach ($rss->items as $item ) {
$url = $item[link];
$title = $item[title];
$description = $item[description];
echo "<li>";
echo "<b>Topic:</b> <a href=$url><b><u>$title</u></b></a><br/><br/>";
echo "$description<br/><br/>";
echo "</li>";
}
}
else {
echo "<a href=$url>", $url, "</a> - Server Down!<br/>";
}
?>
</body>
</html>
</nowiki>
 
*Save the edited file
*http://localhost/feeds/index.php
 
=== FTP Server ===
 
==== How to install FTP Server for File Transfer service ====
 
*Read [[#General Notes]]
*Read [[#How to add extra repositories]]
 
sudo apt-get install proftpd
 
==== How to configure FTP user to be "jailed" (chrooted) into their home directory ====
 
*Read [[#General Notes]]
*Read [[#How to install FTP Server for File Transfer service]]
 
sudo cp /etc/proftpd.conf /etc/proftpd.conf_backup
sudo gedit /etc/proftpd.conf
 
*Find this section
 
...
DenyFilter \*.*/
...
 
*Add the following line below it
 
DefaultRoot ~
*Save the edited file
 
sudo /etc/init.d/proftpd restart
 
==== How to configure FTP Server to allow anonymous FTP user to read only ====
 
*Read [[#General Notes]]
*Read [[#How to install FTP Server for File Transfer service]]
 
sudo cp /etc/proftpd.conf /etc/proftpd.conf_backup
sudo gedit /etc/proftpd.conf
 
*Append the following lines at the end of file
 
<Anonymous ~ftp>
User ftp
Group nogroup
UserAlias anonymous ftp
DirFakeUser on ftp
DirFakeGroup on ftp
RequireValidShell off
MaxClients 10
DisplayLogin welcome.msg
DisplayFirstChdir .message
<Directory *>
<Limit WRITE>
DenyAll
</Limit>
</Directory>
</Anonymous>
 
*Save the edited file
 
sudo /etc/init.d/proftpd restart
 
==== How to configure FTP Server to allow anonymous FTP user to read/write ====
 
*Read [[#General Notes]]
*Read [[#How to install FTP Server for File Transfer service]]
 
sudo cp /etc/proftpd.conf /etc/proftpd.conf_backup
sudo gedit /etc/proftpd.conf
 
*Append the following lines at the end of file
 
<Anonymous ~ftp>
User ftp
Group nogroup
UserAlias anonymous ftp
DirFakeUser on ftp
DirFakeGroup on ftp
RequireValidShell off
MaxClients 10
DisplayLogin welcome.msg
DisplayFirstChdir .message
</Anonymous>
 
*Save the edited file
 
sudo /etc/init.d/proftpd restart
 
==== How to map anonymous FTP user to folders outside /home/ftp/ ====
 
*Read [[#General Notes]]
*Read [[#How to install FTP Server for File Transfer service]]
 
sudo cp /etc/proftpd.conf /etc/proftpd.conf_backup
sudo gedit /etc/proftpd.conf
 
*Append the following lines at the end of file
 
<Anonymous /location_of_folder/>
User ftp
Group nogroup
UserAlias anonymous ftp
DirFakeUser on ftp
DirFakeGroup on ftp
RequireValidShell off
MaxClients 10
DisplayLogin welcome.msg
DisplayFirstChdir .message
<Directory *>
<Limit WRITE>
DenyAll
</Limit>
</Directory>
</Anonymous>
 
*Save the edited file
 
sudo /etc/init.d/proftpd restart
 
==== How to change the default port number for FTP Server ====
 
*Read [[#General Notes]]
*Read [[#How to install FTP Server for File Transfer service]]
 
:''e.g. Assumed that new port number is 77''
 
sudo cp /etc/proftpd.conf /etc/proftpd.conf_backup
sudo gedit /etc/proftpd.conf
 
*Find this line
 
Port 21
 
*Replace with the following line
 
Port 77
 
*Save the edited file
 
sudo /etc/init.d/proftpd restart
 
==== How to ftp into remote Ubuntu machine via Windows machine ====
 
*Read [[#General Notes]]
 
:''e.g. Assumed that remote Ubuntu machine have installed FTP Server service''
:'' Read [[#How to install FTP Server for File Transfer service]]''
 
*Download FileZilla: [http://prdownloads.sourceforge.net/filezilla/FileZilla_2_2_18_setup.exe?download Here]
 
=== Streaming Media Server ===
 
==== How to install GNUMP3d for Streaming Media Server service ====
 
*Read [[#General Notes]]
*Read [[#How to add extra repositories]]
*Read [[#How to install Apache HTTP Server for HTTP (Web) Server service]]
 
:''e.g. /var/music/ is the directory containing multimedia files''
 
sudo apt-get install gnump3d
 
*http://localhost:8888
 
==== How to change the default directory containing multimedia files for GNUMP3d ====
 
*Read [[#General Notes]]
*Read [[#How to install GNUMP3d for Streaming Media Server service]]
:''e.g. Assumed that new directory containing multimedia files is /home/music/''
 
sudo cp /etc/gnump3d/gnump3d.conf /etc/gnump3d/gnump3d.conf_backup
sudo gedit /etc/gnump3d/gnump3d.conf
 
*Find this line
 
root = /var/music
 
*Replace with the following line
 
root = /home/music
 
*Find this line
 
user = gnump3d
 
*Replace with the following line
 
user = root
 
*Save the edited file
 
sudo /etc/init.d/gnump3d restart
 
*http://localhost:8888
 
==== How to change the default port number for GNUMP3d ====
 
*Read [[#General Notes]]
*Read [[#How to install GNUMP3d for Streaming Media Server service]]
 
:''e.g. Assumed that new port number is 7878''
 
sudo cp /etc/gnump3d/gnump3d.conf /etc/gnump3d/gnump3d.conf_backup
sudo gedit /etc/gnump3d/gnump3d.conf
 
*Find this line
 
port = 8888
 
*Replace with the following line
 
port = 7878
 
*Save the edited file
 
sudo /etc/init.d/gnump3d restart
 
*http://localhost:7878
 
 
=== Image Gallery Server ===
 
==== How to install Gallery for Image Gallery Server service ====
 
*Read [[#General Notes]]
*Read [[#How to add extra repositories]]
*Read [[#How to install Apache HTTP Server for HTTP (Web) Server service]]
*Read [[#How to install PHP for Apache HTTP Server]]
 
sudo apt-get install gallery (when prompted to restart Apache, choose No or Cancel)
sudo apt-get install imagemagick
sudo apt-get install jhead
sudo apt-get install libjpeg-progs
sudo /etc/init.d/apache2 restart
sudo sh /usr/share/gallery/configure.sh
 
*http://localhost/gallery/setup/index.php
*Gallery Configuration
 
Gallery Configuration Wizard: Step 1
Next Step ->
 
Gallery Configuration Wizard: Step 2
General settings Tab ->
Admin password: Specify the password
Locations and URLs Tab ->
Album directory: /var/www/albums/
Temporary directory: /tmp/
Gallery URL: http://localhost/gallery
Albums URL: http://localhost/albums
Next Step -->
 
Gallery Configuration Wizard: Step 3
Next Step -->
 
Gallery Configuration Wizard: Step 4
Save Config ->
 
*http://localhost/gallery/albums.php
 
==== How to configure Gallery to be accessible via Internet (Hostname or fix IP) or LAN (fix IP) ====
 
*Read [[#General Notes]]
*Read [[#How to install Gallery for Image Gallery Server service]]
 
:''e.g. Assumed that network and internet connections have been configured properly''
:'' Internet (Hostname or fix IP) or LAN (fix IP): http://www.url.com''
 
sudo cp /etc/gallery/config.php /etc/gallery/config.php_backup
sudo gedit /etc/gallery/config.php
 
*Find this section
 
...
$gallery->app->photoAlbumURL = "http://localhost/gallery";
$gallery->app->albumDirURL = "http://localhost/albums";
...
 
*Replace with the following lines
 
$gallery->app->photoAlbumURL = "http://www.url.com/gallery";
$gallery->app->albumDirURL = "http://www.url.com/albums";
 
*Save the edited file
*http://www.url.com/gallery/albums.php
 
==== How to configure Gallery to be accessible via LAN (dynamic IP) ====
 
*Read [[#General Notes]]
*Read [[#How to install Gallery for Image Gallery Server service]]
 
:''e.g. Assumed that network connections have been configured properly''
:'' LAN (dynamic IP): 192.168.0.1''
 
sudo cp /etc/gallery/config.php /etc/gallery/config.php_backup
sudo gedit /etc/gallery/config.php
 
*Find this section
 
...
$gallery->app->photoAlbumURL = "http://localhost/gallery";
$gallery->app->albumDirURL = "http://localhost/albums";
...
 
*Replace with the following lines
 
$gallery->app->photoAlbumURL = "/gallery";
$gallery->app->albumDirURL = "/albums";
 
*Save the edited file
*http://192.168.0.1/gallery/albums.php
 
==== How to backup/restore Gallery data ====
 
*Read [[#General Notes]]
*To backup Gallery data
 
sudo tar zcvf gallery.tgz /var/www/albums/ /etc/gallery/
 
*To restore Gallery data
 
sudo tar zxvf gallery.tgz -C /
 
== Проблемы и их решение ==
 
==== Настройка сетевых интерфейсов ====
 
*Прочтите [[#Общие замечания]]
*Прочтите [[#Как на время отключить сервисы, запускаемые при загрузке системы]]
 
==== Synchronizing clock to ntp.ubuntulinux.org... (taking too long to load) ====
 
*Read [[#General Notes]]
*Read [[#How to temporary skip boot-up services]]
*Read [[#How to permanently disable/enable boot-up services]]
 
service_name = ntpdate
 
==== How to disable system time/date from being reset to UTC (GMT) ====
 
*Read [[#General Notes]]
 
sudo cp /etc/default/rcS /etc/default/rcS_backup
sudo gedit /etc/default/rcS
 
*Find this line
 
...
UTC=yes
...
 
*Replace with the following line
 
UTC=no
 
*Save the edited file
*System -> Administration -> Time and Date
 
Set the correct time/date
 
sudo /etc/init.d/hwclock.sh restart
 
==== How to configure sound to work properly in GNOME ====
 
*Read [[#General Notes]]
*Read [[#How to add extra repositories]]
 
sudo killall esd
sudo cp /etc/esound/esd.conf /etc/esound/esd.conf_backup
sudo gedit /etc/esound/esd.conf
 
*Find this section
 
...
auto_spawn=0
spawn_options=-terminate -nobeeps -as 5
...
 
*Replace with the following lines
 
auto_spawn=1
spawn_options=-terminate -nobeeps -as 2 -d default
 
*Save the edited file
 
sudo apt-get install libesd-alsa0
sudo gedit /etc/asound.conf
 
*Insert the following lines into the new file
 
pcm.card0 {
type hw
card 0
}
pcm.!default {
type plug
slave.pcm "dmixer"
}
pcm.dmixer {
type dmix
ipc_key 1025
slave {
pcm "hw:0,0"
period_time 0
period_size 2048
buffer_size 32768
rate 48000
}
bindings {
0 0
1 1
}
}
 
*Save the edited file
sudo ln -fs /usr/lib/libesd.so.0 /usr/lib/libesd.so.1
 
System -> Preferences -> Sound
Sound preferences
 
General Tab -> Sounds for events '''(Un-Checked)'''
 
*Save and close all opened applications, Reboot computer
 
==== How to forcefully empty Trash in GNOME ====
 
*Read [[#General Notes]]
 
sudo rm -fr $HOME/.Trash/
 
==== Как удалить повторяющиеся элементы меню в GNOME ====
 
*Прочтите [[#Общие замечания]]
 
rm -f $HOME/.config/menus/applications.menu
 
*Прочтите [[#Как обновить панель GNOME?]]
 
==== How to refresh Places menu in GNOME (if mounts to /media/ in /etc/fstab does not show up) ====
 
*Read [[#General Notes]]
 
sudo /etc/init.d/dbus-1 restart
 
== Обновление версии Ubuntu ==
 
==== Как обновиться с Hardy Heron до Intrepid Ibex ====
Если вы хотите использовать интернет-подключение, вы можете просто отредактировать свой файл источников софта:
 
sudo gedit /etc/apt/sources.list
Замените все упоминания hardy (краткое название релиза 8.04) на intrepid (название релиза 8.10)
 
Теперь обновите список пакетов
sudo apt-get update
И выполните апгрейд софта
sudo apt-get dist-upgrade
 
Если у вас уже есть диск Intrepid Ibex (Ubuntu 8.10), вы можете произвести апгрейд прямо с него.
Правда, официальные источники утверждают, что desktop диск для этой цели не подойдет, а нужен alternate (образ диска alternate для i386 доступен, к примеру, по адресу http://ubuntu-releases.cs.umn.edu/8.10/ubuntu-8.10-alternate-i386.iso, а для Amd64- http://ubuntu-releases.cs.umn.edu/8.10/ubuntu-8.10-alternate-amd64.iso)
Если ваш CD-ROM смонтирован на шорткат /cdrom, выполните следующую команду:
gksu sh /cdrom/cdromupgrade
 
Либо вызовите update manager командой
gksu "update-manager -c"
 
== Удаленные Темы ==
 
* Темы удаленные с этого руководства могут быть найдены [http://linux.edu.lv/index.php?name=Forums&file=viewtopic&t=73 тут]
 
[[Категория: Операционные системы]]
[[Категория: Ubuntu]]